is mold from water damage harmful | toxic mold removal

Gently use your fingers to press around the ceiling and drywall. If you get a mushy feel to it, do not press any harder and call a professional water damage consultant to come out and go from there (as well as the Landlord if applicable).
Your favorite part of the day may be snuggling up to your fur baby, but pet dander traps allergens — which means you’re inviting those allergens to your bed. If you can’t resist the cuddles, then you should completely shave your dog. Just kidding — just be sure to bathe them once a week.
Removing black mold with baking soda is a great green cleaning solution for the home. As an alternative to bleach and ammonia, baking soda does a pretty good job (with a little elbow grease) at eliminating black mold and its odors.
As Dr. Shoemaker explained in a recent article, one of the most prominent labs performing ERMI testing, ESML (also the lab behind MyERMI), is not following these procedures and is currently under investigation by the EPA. Several CIRS-aware physicians had noticed that levels of Wallemia, a particularly problematic species of mold, tended to be under-reported on the ESML test. These false negatives could lead to someone erroneously assuming their home or workplace is safe, when in fact it is not.
To put it bluntly, our industry is sadly full of scare tactics and misinformation about mold, and especially about Black Mold. We see misinformed media reports all the time about Black Mold. We also hear story after story of someone getting taken advantage of by an immoral contractor or unscrupulous company who uses misinformation and scare tactics to take advantage of vulnerable customers who are given bad information about mold and Black Mold.
Lori, I’ve had pretty good experience getting mold and mold stains out of fabrics using Buttermilk. Not sure why it works, but it does. We had a flood and some of the clothes set too long in containers and developed mold. Soaking them in a water/buttermilk bath really got them clean again.
This panel contains the following tests: Matrix Metalloproteinase-9 (MMP9) Transforming Growth Factor beta 1 (TGF-beta 1) Melanocyte-Stimulating Hormone (MSH) Antidiuretic Hormone (ADH) OsmolalityBiotoxin illness refers to the cause of a persons illness. All biotoxin illnesses have one common
Few molds can begin growing at temperatures of 4 °C (39 °F) or below, so food is typically refrigerated at this temperature. When conditions do not enable growth to take place, molds may remain alive in a dormant state depending on the species, within a large range of temperatures. The many different mold species vary enormously in their tolerance to temperature and humidity extremes. Certain molds can survive harsh conditions such as the snow-covered soils of Antarctica, refrigeration, highly acidic solvents, anti-bacterial soap and even petroleum products such as jet fuel.[8]:22
I believe that a birth defect that was caused by exposure to mold could have been the result of old technology under the toilet and the pregnant woman would be exposed to it every day of her pregnancy. Every home has them and up till now what is out of sight is out of mind. I am sure there are cases where the moms did not know how they were exposed. I believe I have found the answer.
Bleach – Bleach is effective at killing mould, but it will also fade any colours. So use bleach only on whites or colourfast clothes, as a pre-soak or scrubbed directly onto the mould itself. Always follow the product instructions, wear rubber gloves, and work in a well-ventilated area away from any children, as bleach fumes can be strong! And, remember to store bleach in a secure cupboard out of the reach of children or pets. (Use biocides safely. Always read the label and product information before use.)
In most cases mold can be removed from hard surfaces by a thorough cleaning with commercial products, soap and water, or a bleach solution of no more than 1 cup of bleach in 1 gallon of water. Absorbent or porous materials like ceiling tiles, drywall, and carpet may have to be thrown away if they become moldy. If you have an extensive amount of mold and you do not think you can manage the cleanup on your own, you may want to contact a professional who has experience in cleaning mold in buildings and homes. It is important to properly clean and dry the area as you can still have an allergic reaction to parts of the dead mold and mold contamination may recur if there is still a source of moisture.
Try using a lemon, cut in half , rub on area that keeps coming back. Squeeze the juice out of the lemon on the area and let set for sometime. Take a clean steal wool scrub with baking soda, let dry. Wipe with clean cloth. Take normally three to four days to dry out.
Another front runner: Asko (made in Sweden) – did 5 to 7 loads each week for over 14 years; never had a problem. Tried top loaders too, and gave them up quickly (we like our laundry items to be washed clean, not just soaked in perfumed detergent so that they “smell fresh”).
you need to eat Doug Kaufmann’s Phase One Diet if you have a mold disease or fungus disease. Also, you need to alternate between ginger and Turmeric every other day for a month, then off a month, then on a month until the inflammation is gone. Don’t touch carbs or sugar if you have a fungal disease including mold. You have to kill the internal parasites for 70 ~ days then kill the fungus with antifungal herbs and eat greens uncooked, if you eat cooked foods, be sure to take enough digestive enzymes. Be sure you’re filled with fiber and probiotics, there’s none like Dr. Ohira’s probiotics, I’ve spoken to them… you can contact them and find the difference, it’s real. – didn’t send an email
Abnormalities documented by visual contrast sensitivity (VCS) testing. VCS testing measures your ability to see details at low contrast levels. Dr. Shoemaker and Dr. Ken Hudnell—a principal investigator for the U.S. EPA’s National Health and Environmental Effects Research Lab and an expert on how neurotoxins affect the physiology of vision—discovered that the biotoxins affect the optical nerve and decrease the ability to detect visual contrast.
I have a daughter who lives in an apartment that has mold growing right outside the AV air ducts. How do we get the air ducts cleaned? The owners are a large corporation and all they did was paint over the old with kilz (sp?). She’s been unable to reach anybody who is willing to help because she isn’t the owner of the property. (I’ve used hot soapy water with about 1/3 white vinegar on mold growing in my house and scrubbed all of it off over a year ago and it still hasn’t come back!). So we know how to remove it from the walls, But how do we get it out of the ducts ? And how do we get the pros to return ou r calls?
Large amounts of mold require specialized removal techniques and personal protective equipment. The U.S. Environmental Protection Agency described the necessary steps in a document entitled “Mold Remediation in Schools and Commercial Buildings”. However, this document is applicable to mold removal in homes as well.28
P. polycephalum is not only a great navigator and good forward thinker, so to speak—it is also a healthy eater. Slime molds survive best on a diet comprising two thirds protein and one third carbohydrates. Audrey Dussutour of the University of Paul Sabatier in France placed slime molds in the center of a clock face of 11 different pieces of food, each with a unique ratio of proteins and carbohydrates. When presented with this circular menu, slime molds consistently glommed onto the piece of food with optimal balance of nutrients.
In any case, a medical diagnosis is needed. For example, does the person have an allergy, asthma, or an infection? There are established methods for diagnosing these and many other conditions. Diagnosis is related to the disease process, not a specific trigger. For example, it is possible to test people for allergies to molds, but positive results do not necessarily correlate with symptoms. A sizeable percentage of the U.S. population will test positive for mold allergens but have no symptoms; estimates range from 3 percent to more than 90 percent.9 And, generally speaking, treatments will not differ if the cause is mold exposure versus other triggering conditions.
Remember! Ammonia is a skin and eye irritant and its fumes are quite toxic. This mold killing agent is poisonous and could prove lethal when ingested or its fumes are inhaled. Especially, in non-ventilated areas without the use of a respirator.
Call a professional mold remover if your black mold problem is extensive. Experts recommend that you have black mold professionally removed if it is scattered in areas greater than a 10-square-foot section. At this point it won’t be possible to keep the mold at bay using household products. [3]
CLINGY CREEPER: The wild cucumber’s (Sicyos angulatus) spidering tendrils, which grab onto fences and other plants for support, are super-sensers. Most people cannot feel the weight of a string weighing less than 0.07 ounces (2 grams). But the tendrils of the wild cucumber respond to the touch of a string weighing only 0.009 ounces (0.25 grams) and immediately start twirling around the tiny thread. Wikimedia Commons
Keep humidity levels as low as you can—no higher than 50%–all day long. An air conditioner or dehumidifier will help you keep the level low. Bear in mind that humidity levels change over the course of a day with changes in the moisture in the air and the air temperature, so you will need to check the humidity levels more than once a day.
The first step in the protocol is removing the patient from exposure to the biotoxins. This involves testing all environments (home, workplace, recreational) that the patient spends significant amounts of time in throughout the course of his or her daily life. If mold or other biotoxins are identified, those environments must be successfully remediated (followed by taking adequate measures to prevent recurrence), or the patient must relocate to another home or workplace.

What We Do

Many times, in the past, I have just made a diagnosis of toxic mold syndrome based on a patient’s symptoms and demonstration of toxic mold in the patient’s environment. And I still do this clinical diagnosis quite a bit, mostly due to the costliness of diagnostic testing.
Hypersensitivity Pneumonitis is an inflammation of the lung caused by small airborne particles such as bacteria, mold, fungi, or inorganic matter. There are two types of hypersensitivity pneumonitis, acute and chronic. Symptoms include fever, chills, cough, shortness of breath, body aches. Examples of hypersensitivity pneumonitis include bagassosis, mushroom worker’s disease, sauna taker’s disease, pigeon breeder’s disease, and farmer’s lung disease. Most commonly, it results from exposure to pet birds.
The presentation in toxic mold illness thus may be expected to be a bit more complex than what may be present when a single particularly virulent pathogen is wholly responsible for causing a particular disease.
You don’t need to rinse the surface afterwards (unless it is used for food preparation or a surface which may be touched by small children or pets) as the bleach will inhibit mold growing in the future.
Various practices can be followed to mitigate mold issues in buildings, the most important of which is to reduce moisture levels that can facilitate mold growth.[18] Properly functioning air conditioning (AC) units are essential to controlling levels of indoor airborne fungal spores. Air filtration reduces the number of spores available for germination, especially when a High Efficiency Particulate Air (HEPA) filter is used. A properly functioning AC unit also reduces the relative humidity, or the moisture inherent in the air.[22] The United States Environmental Protection Agency (EPA) currently recommends that relative humidity be maintained between 30% to 50% to preempt mold growth.[23] Considering that fungal growth requires cellulose, plant fiber, as a food source, using building materials that do not contain cellulose is an effective method of preventing fungal growth.
Depending on how far advanced your mold challenge is; you could (on the cheap), heavily cover the entire cushion with baking soda. Allow the baking soda to soak into the cells and fibers of the cushion overnight (first one side and then the other for the second night).
I have a tingling sensation sometimes feels like prick or bite all over body. No rash or sores though. Its particularly bothersome at night. Muscle and joint pain too. 47 years old. I was in a dwelling that had mold several times to show remediators around and then it started about the second or third exposure. Seems too like my short memory has suffered some since, as well as more freq urination. IH tests showed spore levels to be 10 times higher than outside. I think i have toxicosis but have not neen tested….were you happy with your test experience? Did they respond to your question about detox and duration? my exposure totaled maybe 10 hours over the course of three weeks beginning about six weeks ago. I am experimenting with coconut shell charcoal and detox teas……hoping symptoms go away. Hopefully will be seeing a dermatologist soon too. How do you feel now…symptoms still? Thanks in advance.
Toxic black mold causes serious symptoms and health problems such as mental impairment, breathing problems, damage to internal organs and sometimes even death. The main groups of symptoms toxic black mold causes are:
If mold remains even after scrubbing in step 4, it’s time to take reach for the sandpaper. When considering how to remove mold from wood, an abrasive might not seem like the obvious solution. It may seem counterintuitive, but sanding is the only way to reach the mold deep within the wood. Work the sandpaper slowly around the affected area until you see no more signs of mold. After sanding, it’s a good idea to refinish the wood, not only for appearances’ sake, but also to prevent a future outbreak. Finally, get rid of all the rags and such that came into contact with the mold, and start trying to figure out how to limit the amount of moisture present in the area where you’ve been working.
Yes these are exactly the symptoms of mold. I am having short term memory problems and also can’t focus. Fatigued and sleepy all day long. Headaches come and go. I know this might sound hard to do, but you either get professional mold removers or move out of the house.
However, several of these cleaning agents are highly toxic to use indoors – so be careful. And, great care should also be taken to ensure that your work area is well ventilated and a respirator and gloves are worn while killing black mold in your home.

6 Replies to “is mold from water damage harmful | toxic mold removal”

  1. Reality: According to the EPA, “While air-cleaning devices may help to control the levels of airborne allergens, particles or, in some cases, gaseous pollutants in a home, they may not decrease adverse health effects from indoor air pollutants.”
    Regarding the methods for cleaning the air in the home, there are some resources out there that claim that certain plants can help clean the air (e.g.
    The awareness of toxic mold’s effect on human health has increased dramatically over the past few years. But mold is only one of the many biotoxins found in water-damaged buildings, and the illness caused by exposure to these toxins is much more complex than most clinicians and patients assume.
    I have a question. My daughter has lyme and the “dreaded” HLA gene. We have done the ERMI test as well. We are moving her out of the house because our crawl space will have to be sealed, etc… We have a chance to move into a relative’s attached apartment. However, it did flood in the past. The ducts have been replaced as have the walls and floors. Would that be safe?
    The fourth step is to use both natural supplements and pharmaceutical medications to remove the mold toxins from your body.  Since these toxins are the main cause of this syndrome, effective treatment is geared toward removal of these toxins. These remedies can be found on the BLACK MOLD DETOX webpage! 

  2. hi, my name is Liesle I’m having the same problem. I’m trying to get my case together bc I’m going to see the owner in court.I wish you the best. My biggest problem was I was disabled before this. and all the mold doctors don’t take insurance. wheat do I do, I don’t have the money for this. Its a silent killer. Because not enough people know enough about it. Good luck to you, N I’ll be praying for you and everyone!!!
    In addition, in 2004 the IOM found sufficient evidence to link exposure to damp indoor environments in general to upper respiratory tract symptoms, cough, and wheeze in otherwise healthy people and with asthma symptoms in people with asthma. The IOM also found limited or suggestive evidence linking exposure to damp indoor environments in general to shortness of breath, to respiratory illness in otherwise healthy children and to potential development of asthma in susceptible individuals. In 2009, the World Health Organization issued additional guidance, the WHO Guidelines for Indoor Air Quality: Dampness and Mould [PDF – 2.65 MB]. Other recent studies have suggested a potential link of early mold exposure to development of asthma in some children, particularly among children who may be genetically susceptible to asthma development, and that selected interventions that improve housing conditions can reduce morbidity from asthma and respiratory allergies, but more research is needed in this regard.
    The EPA encourages homeowners to have their houses tested for radon. Quick tests ($8-$25) take three to seven days and are available at hardware stores and online; a 90-day continuous monitoring assessment (about $25 for a DIY kit; $150 for a professional inspection), which accounts for peaks and lows, will produce more thorough results. If your home has more than 4 pCo/L (picocuries per liter of air), hire a professional contractor to seal cracks and to install a venting system. You can also reduce your risk by increasing natural ventilation throughout the house and not smoking.

  3. Stachybotrys (/ˌstækiˈbɒtrɪs/) is a genus of molds, hyphomycetes or asexually reproducing, filamentous fungi. Historically, it was considered closely related to the genus Memnoniella,[1][2] because the spores are produced in slimy heads rather than in dry chains. Recently, the synonymy of the two genera is generally accepted.[3] Most Stachybotrys species inhabit materials rich in cellulose. The genus has a widespread distribution, and contains about 50 species.[4] The name comes from the Greek words σταχυς stakhus (ear of grain, stalk, stick; metaphorically, progeny) and βότρυς botrus (cluster or bunch as in grapes, trusses).
    If you’re suffering from mold toxicity, sugar is definitely not your friend. Fungi, which include molds and yeasts, require the presence of sugar for survival. Eliminate, or significantly cut down, your sugar intake to help to get rid of any black mold symptoms.
    The EPA considers bacteria, molds, mildew, viruses, animal dander, cat saliva, house dust, mites, cockroaches and pollen all biological contaminants. Excessive moisture creates breeding grounds for these contaminants, so ventilate adequately and keep relative humidity between 30 percent and 50 percent to prevent condensation on building materials.
    Toxic burden is determined by two factors: the levels of toxic chemicals and microorganisms that we’re exposed to, and the function of our innate detoxification system. If our exposure to toxins is high and our detoxification system is compromised—due to genetic predisposition, environmental factors, or both—then our toxic burden will be high.
    Put mold, sponges and any materials coming in contact with moldy surfaces into heavy-duty garbage bags. Take them to the nearest exit, not through a clean house, so the mold spores won’t contaminate clean areas.
    Another helpful intervention is to use air filters and purifiers/sanitizers. I will write an article discussing them in more detail soon. For now, I will tell you what I use and recommend to my patients:
    To minimize the amount of dust kicked up during cleaning — especially if you are concerned about lead dust — wipe down floors with a damp mop, dust with a damp cloth and clean surfaces with a vacuum cleaner with a HEPA filter.

  4. I also have the mould problem on the rubber seal. Just like all of you, I have tried everything to keep it from happening to no avail. I had the smell in the machine despite leaving the door open – couldn’t get rid of it no matter what I did. I have recently stopped using fabric softner and use vinegar in the final rinse – no smell. Haven’t had a chance to tackle the mold, but at least the smell isn’t there.
    I picked up the tip when initially researching how to clean toxins from vegetables naturally; and, learned along the way the many other benefits that Grapefruit Seed Extract offers. BTW, it can also be used to help keep your hot tub and Jacuzzi disinfected!
    Have a Siemens integrated washer/dryer; can’t believe the mould on the door rubber. I have had Hoover, Hotpoint, and Artist machines and never had this problem; even the soap drawer gets it. I thought at first I’d washed some football kit and it was mud. Absolutely disgusted.

  5. Very nice post! I will be using this very soon, however I did want to mention that tea tree oil is toxic to dogs and cats and can very easily be life-threatening. See here:
    Ask if there are any pre-appointment restrictions when making your appointment. For example, if you’re having allergy tests, your doctor will likely want you to stop taking allergy medications for several days before the test.
    Jump up ^ “Facts about Stachybotrys chartarum and Other Molds – How do you get the molds out of buildings, including homes, schools, and places of employment?”. Centers for Disease Control and Prevention. U.S. Department of Health & Human Services. September 18, 2012. Retrieved 2015-12-16.
    A better method of initially screening a building for mold is the ERMI test. ERMI stands for Environmental Relative Moldiness Index. It utilizes quantitative polymerase chain reaction (MSQPCR) technology to identify mold in dust that has settled in buildings.

  6. Bamboo is a sustainable wood because it grows rapidly and reaches maturity in just four years. The plywood is laminated together using a low-VOC (volatile organic compound) adhesive. Bamboo is great for bathrooms because it stands up well in a moist climate. In this remodel, the bamboo vanity is topped off with a bamboo sink.
    Does baking soda react to anything else, such as bleach? Specifically, is it OK to clean the grout with baking soda, wipe it down, and then mop the floor with bleach water? Or do you need to rinse off all the baking soda very carefully first?
    Molds produce irritating substances that may act as allergy causing substances (allergens) in sensitive individuals. Furthermore, some molds produce toxic substances known as mycotoxins, but mold itself is not poisonous or toxic. The term “toxic mold,” therefore, refers to the fact that certain kinds of mold can produce mycotoxins. The conditions under which some molds produce toxins are poorly understood, and the presence of mold, even a mold that is capable of producing toxins, does not always imply that toxins are being produced or that a health risk or problem is present. Mold may not cause any health problems, or it may lead to allergy or other symptoms in people, including adults and children, who are sensitive to molds.

Leave a Reply

Your email address will not be published. Required fields are marked *