Put undiluted white distilled vinegar into a spray bottle and spray the vinegar directly on the moldy area(s). Let it set without any rinsing or scrubbing. This is a smelly natural mold remedy, but it’s said to be highly effective and the vinegar scent will fade.
Robbie, there currently is no Dr.’s in Louisville that can competently treat for mold toxicity. I had to go to Chicago to see one. After the first visit, they can do appointments over the phone. However, lately there may be a few Dr.’s that are closer, that may possibly treat mold toxicity/CIRS. Send me your contact info and I can send their names/numbers to you. None of them likely take insurance, it’s usually an out of pocket expense.
 Of note, the development of asthma did not correlate with the amount of visible mold, but did correlate with the more sophisticated measurement techniques described in the article. This lends support to calls for standardized methods of evaluating homes and other environments for molds and other substances which can affect indoor air quality and human health.
Asthma attacks may be caused by mold or mold spores in people who have asthma and are allergic to mold. Even in some nonallergic individuals, mold can cause symptoms of irritation in the eyes, skin, and airways. For example, the “black mold” Stachybotrys, along with some other types of mold, produces toxins known as mycotoxins that can cause irritation of the skin and airways in susceptible individuals.
Pinar, don’t panic. It’s very easy to do. You would need to get rid of it as soon as possible before it starts to spread and cause more health problems. Make sure you follow the instructions in this article and wear a mask and gloves when cleaning it. Try the tea tree oil first- it’s very effective. And make sure your room is well ventilated after the problem has been resolved to prevent more mold in the future.
If you just can’t handle the smell of vinegar (even short term), then there is another option that is odorless. I’m talking about grapefruit seed extract, which is an excellent antifungal both internally and externally. To use it on a moldy area in your home, simply combine 20 drops of grapefruit seed extract with two cups of water in a spray bottle. Shake the mixture and spray it directly on the mold and do not rinse. (11)
Hi Maureen…I didn’t know if you were asking me or Lauren for the name of a dr, so I’ll give you mine. His name is Michael Rothman, MD a naturopath that I went to by chance for something else and if I hadn’t I NEVER would have known. He was recently certified by Dr Rithchie Shoemaker in the treatment protocol and he is in Spring Lake, NJ. If you’re interested, he’s listed as MD Wellness or by his name. Hope this helps! Good luck…
You can also use vinegar with hydrogen peroxide during the cleaning to more effectively remove the mold. Afterwards store the spray bottle in a dark place since light diminishes hydrogen peroxide’s effectiveness.
Hi – we recently (in the past six months) removed/replaced the silicone coating along the grout line where the tub meets the tile wall, and now I think mould is behind the silicone….I think I know the answer here, but do you think we should remove the silicone, deal with the mould and re-seal, or forget about silicone sealant altogether and just keep the grout accessible to cleaning?
Had a Miele for years – could leave wet wash in it for days and never had a problem. The GE that came with my condo began to stink after a month. I am ready to scrap it and suffer the considerable outlay required to have a Miele again. Cleaning it now, but not hopeful.
It’s impossible to get rid of all mold and mold spores in your home, but because mold spores can’t grow without moisture, reducing moisture in your home is the best way to prevent or eliminate mold growth. If there is already mold growing in your home, it’s important to clean up the mold and fix the problem causing dampness. If you clean up the mold but don’t fix the problem, the mold will most likely return.
Yikes, Helen! You’re very lucky you weren’t seriously injured. Chlorine and ammonia form a deadly gas when mixed together…the mixture was actually used for chemical warfare during WWI. Yet another reason to stick to natural cleaners!!!
Black mold is most likely to appear in areas of the home that are particularly warm, humid and damp. Basements or crawlspaces that may have leaks or other sources of moisture are often susceptible to toxic black mold growth. Black mold is readily identifiable by its color. Whereas most other molds are green or gray in color, toxic black mold is a dark black.
I had many of these less common symptoms of black mold poisoning. That made it very difficult for me to believe that my symptoms were actually that of black mold poisoning, even though I knew I had been exposed to high levels of stachybotrys and chaetomium.
Have a Siemens integrated washer/dryer; can’t believe the mould on the door rubber. I have had Hoover, Hotpoint, and Artist machines and never had this problem; even the soap drawer gets it. I thought at first I’d washed some football kit and it was mud. Absolutely disgusted.
Hydrogen peroxide is another odorless option that can be used to kill black mold. Pour a 3 percent concentration hydrogen peroxide into a spray bottle and spray the moldy areas until they are saturated. Let the hydrogen peroxide sit for at least 10 minutes before scrubbing the area well. Wipe the area with hydrogen peroxide when you’re done scrubbing.
In an extensive 2004 report, the Institute of Medicine (IOM) did not find enough evidence to identify health effects which were definitely caused by spending time in damp indoor spaces. However, the experts found that being in damp indoor spaces seemed related to respiratory illnesses: nose and throat [upper respiratory] symptoms, cough, wheeze, and asthma symptoms. They also found limited evidence that these environments can be associated with shortness of breath, the development of asthma in people who did not previously suffer from it, and lower respiratory symptoms (coughing, wheezing, chest tightness, and shortness of breath) in healthy children. Based on available research, IOM was not able to substantiate claims of numerous other symptoms such as skin irritations, fatigue, cancer, lung disease, or respiratory infections. There was enough evidence of health effects overall, though, that IOM identified damp indoor spaces as a public health problem that needs to be addressed.7
Borax is a popular chemical used in many household products such as fungicides, herbicides and as a household cleaner. It deodorizes, cleans and disinfects – making it a really good choice to help fight off and kill black mold.
Mycotoxins cause toxic symptoms which are much worse than the allergic symptoms caused by ordinary molds. Some of the symptoms caused by toxic molds include bleeding, damage to internal organs, mental impairment, cancer and even death in some cases.
When you’re done using any of these methods you may want to finish up with baking soda, a natural disinfectant. Spray the area with a mixture of 1/2 tsp baking soda and a cup of water. Scrub the area clean and rinse with water. If you use vinegar or hydrogen peroxide then finish with baking soda you’ll be sure to get all the mold with this double attack on it!
One of the most important things about remediation is that you should never EVER use bleach for removing mold, as it would make the problem worse. While diet is important in any case, it will not cure you of CIRS, if that is your problem. Look up a Shoemaker certified doctor on http://www.survivingmold.com. Many of them do phone consultations.
Try taking 10 capsules of a good activated charcoal. It worked for me within hours my ice pick like leg pain was gone. And it does not constipate me. I also use a good bentonite clay but I take that with the charcoal I do get constipated but it too is worth you trying it as it too should help you.
The U.S. Surgeon General and EPA recommend that all homes be tested for radon; even if the house next door to you tests low, your particular house could be at risk. Short-term tests take two days (often for real estate transactions), while long-term tests take about 90 days but give more accurate results.
This would include carpet, dry-wall, drop-down ceiling tiles and wood paneling. When these items get wet and remain in this condition for any period of time, then the moisture weakened areas are primed for mold growth.
I used neat bleach on a sponge; just keep rubbing around the rubber seal. I left it for a while, then put it on a 95 wash and let it run with no washing in just to get rid of the bleach. Hope it helps; it did for me.
I took a drop ceiling out of an old house and found dry mold on the rough lumber. I sprayed it down with vinegar 2-3 times. Removing it was impossible. I painted over it with a mold killing primer, but still difficult to cover completely. Also I was exposed initially, I’m using a dehumidifier, and staying out of the area for the moment.
P.S. If there’s a few black spots, you’ll be able to clean it, but if it’s spread and the seal is turning black, you can either replace the seal (can get quite expensive) or get a new washing machine.
Often enough, many mold killing products will have ammonia already in them. Be extra cautious to follow the directions on the label to the letter and ensure that the cleanser is never mixed with bleach (in part or whole)!
It is possible to reduce your sensitivity with treatment, yes. I suggest you read up on Shoemaker’s work. The VIP spray can help with this. Also mold avoidance is important, eventually you will probably be able to recognize bad environments. It’s hard to raise MSH though.
Is sugar “toxic” in any amount—even in natural sweeteners? Are artificial sweeteners safe? What about stevia and xylitol? Cut through the confusion and hype and find out which sweeteners are safe for you and your family.
I am not an expert but my understanding is that once MSH becomes low you are susceptible to everything (mold, lyme etc) regardless of HLA genetics. So in other words exposure to one type of biotoxin can lower MSH such that you become susceptible to other types. You should definitely consult a doc that specializes in biotoxin illness to get a definite answer.
Step 4: Using a good spray bottle, wet down the shower and grout lines with a thorough spray of peroxide. While it is wet, use long rows of paper towels to cover the walls from top to bottom. The towels will stick to the damp tiles, but you can use the sprayer to add moisture for better sticking power. Once the towels go onto the walls, keep them very wet as a dried out paper towel will fall right off. If you miss a spot, just dampen and add more towels in layers. This is kind of like making paper- mache.
If mold is clearly present, as determined by visual inspection or a reputable inspector, it should be removed because it can destroy the materials it grows on and is associated with human health problems. Small amounts of mold on hard surfaces can be removed with commercial mold and mildew removers, or with a solution of bleach and water (one cup bleach to one gallon water).27 Follow product instructions carefully to avoid breathing fumes, irritating skin, or splashing chemicals in the eyes.