how bad is black mold | remove black mold naturally

Tramadol 100 Mg For Sale Online Try taking 10 capsules of a good activated charcoal. It worked for me within hours my ice pick like leg pain was gone. And it does not constipate me. I also use a good bentonite clay but I take that with the charcoal I do get constipated but it too is worth you trying it as it too should help you.
When speaking to black mold, there is no single one group or species of mold that defines the phrase “black or toxic mold”. Instead, several classes of molds are more commonly referred to as toxic molds and here are a few of them:
This sounds a lot like what’s happening in Washington, but it’s also what’s happening in Jefferson City, as the crisis facing Missouri Governor Eric Greitens deepens. The state’s attorney general and the majority leader in the state Senate have both called for Greitens to resign after the release of a damning report this week by the state House Special Investigative Committee on Oversight, a bipartisan team.
In recent years, horror stories about “toxic mold” growth in homes, businesses and schools have become a common theme in the news. These headlines have all got us wondering: just how afraid of mold, fungi and bacteria should we actually be?
For the best commenting experience, please login or register as a user and agree to our Community Guidelines. You will be re-directed back to this page where you will see comments updating in real-time and have the ability to recommend comments to other users.
Clean affected areas and sanitize first before replacing damaged carpet padding or drywall. If your mold remediation project is larger than 9 or 10 square feet, then negative air-pressure may need to be applied to the contaminated area.
The surface of this beautiful patio was finished in soy concrete stain. Made with eco-friendly, rapidly renewable materials, soy stain is acid-free and contains no hazardous materials. It’s also great for indoor use.
Thanks for the input I worked for Melaleuca so I have a bottle of green tea oil and I will be using vinger to clean my bathroom floor. I have two small children so I didn’t want to use anything to harm them. This is great. I love that I can use house hold items to get rid of my mold problem.
What is mold? A mold is a type of fungus that grows in filaments and reproduces by forming mold spores that cannot be seen by the naked human eye. Mold can grow and thrive in any season, indoors or outdoors, in damp, warm and humid environments, and it spreads like wild fire. Mold itself flourishes in warm, moist environments, but mold spores can actually survive in harsh, dry environments. The spores float around in indoor and outdoor air. When the spores land on a moist surface, the mold can then start to grow.
Hi .. I am also suffering from toxic mold exposure.. Seek out an environmental specialist or facility. Unfortunately the main stream medical docs are ignorant to environmental exposures. I am also a nurse and let me say .. Thank god I know how to advocate for myself. I am still so so sick however just located an doc who specializes in This field. If this doesn’t detox, I’m off to Dallas or Fla for treatment, insurance does not recognize this illness. It is ridiculous .
Borax: Use a ratio of 1 cup Borax to 1 gallon water. Hot water will dissolve the Borax quicker. Although Borax doesn’t give off toxic fumes, it is less effective on carpets. It is recommended on hard, flat surfaces like tiles. Pour the solution into a spray bottle and spray. Let it sit for a few minutes, then use a scrubbing brush or cloth to wipe the mold away. There’s no need to rinse.
Mold is a non-scientific term for many types of unwanted fungi found both indoors and outdoors. Active mold growth requires moisture. Actively-growing mold damages the material it lives on, thereby impairing structural integrity. In addition, mold is associated with some untoward health effects in humans, including allergies and infections.
Mold and mildew are natural byproducts of summer. That doesn’t mean that you want to share your house with the spores, however. Rather than turning to harsh chemicals, such as bleach or borax, to banish mold, there are eco-friendly, natural ways to kill mold at home that won’t hurt your family, pets or the environment.
Did an empty hot cycle with bleach, a lot of cleaner just for some stubborn mold patches, but smells a lot better. I have only recently started having this problem, and have never had this problem with previous machines, but I have also recently changed from using powder detergents to liquid…I’m going back to powder!!!!
I have moved out last year November, lost 12 kilos in weight, now weigh 38 kilos in total, auto-immune disease, stomach ulcers, pneumonia, vomiting, gastro, painful intestines, weakness and tired all the time, severe restless legs, severe headaches, sinus, confusion, cramps in whole body, from face, spasms to spasms in fingers, hands, feet, toes etc. Joint pain. Many more symptoms. Doctors keep looking to find what is wrong,, loosing more by the week, getting weaker by the week, and no-one has any answers,
If the wood you’re dealing with is either painted or stained, that means the mold has not penetrated. You can therefore stick to a mild cleaning solution—a simple mixture of dishwashing detergent and warm water. Dip a soft-bristled scrub brush into the soapy water you’ve prepared, then gently go over the moldy area. If you get unsatisfactory results, opt for vinegar, an effective mold killer. With a spray bottle filled with vinegar, spritz the mold and then let the vinegar sit for an hour to work its magic. Once enough time has elapsed, proceed to wipe down the wood with a clean, damp towel. Inspect the wood for any remaining mold, and if you don’t see any, wipe the wood down with a rag.
Bleach is often mistaken as the best warrior against mold, but it won’t go deep into the wood to prevent mold growth. Disinfectants can kill molds but do not prevent new growth on damp wood or other materials. Many people are beginning to understand that bleach and other chemicals are harmful, even aggravating asthma and the respiratory tract. Its full negative impact on the environment is not fully known.
Sometimes the signs are not as evident. It may grow in places where you can’t see it, like behind a wall or under a carpet. If you begin experiencing an allergic reaction or suddenly having respiratory problems, you should check for signs of black mold.
“Adverse Human Health Effects Associated With Molds in the Indoor Environment.” American College of Occupational and Environmental Medicine. Feb. 24, 2011. .
This is a major cause for mold growth in attics and basements. An easy solution is to make sure your basement or attic has air flow. Open the windows (even slightly) just to let fresh air in. It is also a good idea to turn on a fan to get stagnant air moving especially if you do not have a home air conditioning system.
I have never heard of these methods to get rid of black mold, I always thought that a professional had to be brought in to remove it. Thank you for the tips. I will certainly pass these tips along to other family members.
​Aspergillus niger * Aspergillus niger can be found in environments where there is very little nutritional value for it to grow. However, it is abundant throughout our environment among the many species of molds.
Use bleach.[1] Some sources recommend the use of bleach while others do not. Objections to bleach are primarily due to how harsh it is and how potentially harmful it can be to breathe in. Some also believe that its effectiveness is not reliably consistent. Nonetheless, it still remains one of the strongest cleaners effective against bleach and safe for painted drywall. Mix one part bleach with three parts water.
Once you know you’ve got a mold problem, it is time to start taking action to get rid of it. Air filters can be a great tool for improving air quality but ultimately, you want to minimize the amount of mold that can be contaminating your air. For that, you need a powerful mold remover. This spray from Home Armor is a great weapon against surface mold spots and other minor mold patches.
It is not always a good idea to use a fast drying fan to attempt drying out a mold contaminated area (such as carpet, drywall and so on). It is best to remove all contaminated items first (to include cutting out affected drywall) and then dispose of properly.
Salus, talk to the CIRS docs on the front lines. The Shoemaker protocol is still the gold standard. I am all for natural treatments and tried them for 4 years. NOTHING pulls mold out of your body except resin. Cholestyramine. The docs that do this every day are getting people well if you follow the protocol carefully. Call these doctors. They are all keeping statistics on success. And the Hi Tech Air technology is better than Air Oasis. I wish Chris new about it. It produces safe hydroxyl radicals that penetrate surfaces. Zero ozone is made by the Hi Tech machines. I have 3 and I love them. They enabled me to start treatment, where before I could not tolerate treatment. I had to take naps every day for 10 years until I used the Hi Tech Air – stable OH molecule machines. My energy is so much better now. This is the foundation for my treatment. A safe environment. I also did not have to throw out all my stuff. good luck to you!
Jump up ^ Empting, L. D. (2009). “Neurologic and neuropsychiatric syndrome features of mold and mycotoxin exposure”. Toxicology and Industrial Health. 25 (9–10): 577–81. doi:10.1177/0748233709348393. PMID 19854819.
Hypersensitivity pneumonitis is a lung disease sometimes called “farmer’s lung” as it is associated with overwhelming exposure to fungi found in feed and grain. Hypersensitivity pneumonitis also has been associated with bird droppings in pigeon breeders and exposure to molds in homes and hot tubs.19
Protect yourself around the mold. Wear a dust mask, clothing or a cover up that can be easily removed and washed or even disposed of. Wear rubber gloves and goggles to protect your eyes so the mold never comes in contact with your body.
Hydrogen Peroxide – Mix 1 part 20% hydrogen peroxide with 4 parts water to create a solution. This should only be used on organic fabrics (cotton, linen, etc.) that aren’t flame-resistant or don’t have easy-care finishes.
I have read through all the comments about the ‘black mold’ on rubber door seals. I had an Indeset and never had it, my daughter had another make and never had it; within the past four years, we have both purchased new machines, both different makes, and we have both got this ‘black mold’ problem. I am thinking it is something in our washing powder or softener??? Theses days we don’t know what goes into washing powder; scientists in some lab somewhere have put something in it that creates mold, but makes our clothes look cleaner when they come out. I don’t know, but it seems like it doesn’t matter what brand of machine; we all get mold. Any boffins out there that could shed some light on it???
Mold absolutely thrives in an environment that offers warmth, low nitrogen, high cellulose content in which to feed and finally moisture to keep it going. A bathroom wall void and the paper on drywall is such a place.
She also notes that smoke alarms should be replaced every 10 years. That’s a good time to upgrade to either a hard-wired or wireless interconnected system. New technologies include ionization systems that react to fast-burning fires, photo-electric alarms that react quickly to smoldering fires, integrated carbon monoxide detectors and fire sprinklers, remote controls and smart-phone apps.
Thousands of household products — paints, paint-strippers, adhesives, MDF, carpet, glues, cleaners, fuels, degreasers and more — off-gas volatile organic compounds. These chemicals cause a number of health effects including eye, nose and throat irritation; headache; nausea; liver, kidney and central nervous system damage; and cancer.
15 years wading through chronic conditions the best I can. What are some better-than-nothing air purifier options for the majority of us that have limited budgets? Say under $200? I appreciate the functional medicine approach, but it would be great if practioners included cheaper alternatives, acknowledging many of us don’t have the choice to choose expensive tests and gadgets.
Every two years, education-policy wonks gear up for what has become a time-honored ritual: the release of the Nation’s Report Card. Officially known as the National Assessment of Educational Progress, or NAEP, the data reflect the results of reading and math tests administered to a sample of students across the country. Experts generally consider the tests rigorous and highly reliable—and the scores basically stagnant.

http://easycryptohunter.co.uk/wp-cron.php?doing_wp_cron=1562199074.8067400455474853515625 What We Do

watch

see url The trichothecene mycotoxins produced by toxic black mold are neurotoxic. This means they can kill neurons in the brain and impair a person’s mental ability. They also cause nervous disorders such as tremors and can cause personality changes such as mood swings and irritability.
Wood, which naturally soaks up and retains water, makes an ideal environment for mold and mildew. If you’re dealing with baseboards, trim, or furniture that’s been affected, we’ll show you how to remove mold from wood. First, remember that speed is the key to successful remediation. Acting quickly not only minimizes the scope of your cleaning project, but also ensures that mold does not compromise the health of the allergy sufferers in your family. So long as the spores haven’t spread over an area larger than ten square feet, you can take care of the problem without help from a professional. Here’s how to remove mold from wood—once and for all!

black mold health treatment | how do you know if you have black mold

Buying Tramadol Online Forum Remember, mold is naturally occurring. It may return. To tackle a few random spots of a fresh resurgence, it’s not necessary to don coveralls. Instead, grab a mask, goggles, gloves, and the leftover mold-killing solution, then proceed from Step 3 onward. Armed with this information on how to remove black mold, you’ll stay on top of the household menace in the future.
Advertising Disclosure: TheSimpleDollar.com has an advertising relationship with some of the offers included on this page. However, the rankings and listings of our reviews, tools and all other content are based on objective analysis. The Simple Dollar does not include all card/financial services companies or all card/financial services offers available in the marketplace. For more information and a complete list of our advertising partners, please check out our full Advertising Disclosure. TheSimpleDollar.com strives to keep its information accurate and up to date. The information in our reviews could be different from what you find when visiting a financial institution, service provider or a specific product’s website. All products are presented without warranty.
Also, make sure to properly ventilate your home. It’s especially important to have exhaust fans in your bathrooms and kitchen. Make sure not to carpet your bathroom(s) because this will only increase the trapping of moisture. You should also remove and replace any carpets in your home that have experienced flooding.
People living in homes with toxic black mold are exposed mainly through breathing in toxic black mold spores and mycotoxins. Toxic black mold mycotoxins create irritation and a burning feeling in a person’s air passages such as the nasal cavity, mouth and throat.
Copyright © 2018 HubPages Inc. and respective owners. Other product and company names shown may be trademarks of their respective owners. HubPages® is a registered Service Mark of HubPages, Inc. HubPages and Hubbers (authors) may earn revenue on this page based on affiliate relationships and advertisements with partners including Amazon, Google, and others.
The awareness of toxic mold’s effect on human health has increased dramatically over the past few years. But mold is only one of the many biotoxins found in water-damaged buildings, and the illness caused by exposure to these toxins is much more complex than most clinicians and patients assume.
THANK YOU! THANK YOU! THANK YOU!!! I am so grateful you wrote this article and that you interviewed Dr. Shoemaker! I’m waiting for my CIRS tests to come back and I can’t wait to move forward toward healing! I’ve been very sick for 12 years and I am just feeling for the first time this may be a huge part of the illnesses I’ve been dealing with. Keep it up, Chris! Your work is so incredibly helpful!!!!
Since many types of mold can produce allergens and irritants, you should contact a qualified mold remediation company regardless of the color or type of mold. In many instances, multiple types of mold can exist in the same house or structure. If you suspect that you have a mold problem, contact a SERVPRO Franchise Professional immediately. Click here to find a SERVPRO Franchise.
The extent of black mold symptoms depends upon the number of spores inhaled and the duration of exposure. Black mold easily causes mold allergy symptoms, and symptoms likely persist until you get rid of the the black mold. Sometimes people don’t realize the health problems they’re having are actually black mold symptoms. Black mold is not something to ignore because it only gets worse the longer you ignore it.
Black mold can be an expensive and potentially unhealthy problem for homeowners, but by testing for black mold, you can know for sure if you’ll need to take steps to eradicate black mold from your home.
So as we can see from the above, the term Black Mold and its typical association is usually completely misunderstood. If you have visible mold or a suspected mold problem, our advice is always the same regardless of the color of the mold: Get rid of the mold. Whether you decide to personally get rid of the mold or hire a professional like Moldman to do so, be very careful and make sure currently accepted Mold Removal and Mold Remediation Principles and protocol are followed.
Your walls, floors, appliances, carpet, or furniture – they can all provide the food mold needs to grow. But the thing all molds need most is moisture, so you’re most likely to see mold in damp places such as bathrooms, kitchens, laundry rooms, basements, and crawl spaces.
If you’re suffering from mold toxicity, sugar is definitely not your friend. Fungi, which include molds and yeasts, require the presence of sugar for survival. Eliminate, or significantly cut down, your sugar intake to help to get rid of any black mold symptoms.
Chronic rhinitis and post-nasal drip symptoms include an itchy, runny nose, sneezing, itchy ears, eyes, and throat. Seasonal allergic rhinitis (also called hay fever) usually is caused by pollen in the air. Perennial allergic rhinitis is a type of chronic rhinitis and is a year-round problem, often caused by indoor allergens, such as dust, animal dander, and pollens that may exist at the time. Treatment of chronic rhinitis and post nasal drip are dependent upon the type of rhinitis condition.
Tea tree oil is a natural fungicide that is effective at killing black mold spores and getting rid of mildew throughout the home. It will work for you equally as a cleaner and as a mold prevention agent.
Water.org is an international nonprofit organization that has positively transformed millions of lives around the world through access to safe water and sanitation. Founded by Gary White and Matt Damon, Water.org pioneers innovative, market-driven solutions to the global water crisis — breaking down barriers to give families hope, health and the opportunity to break the cycle of poverty.
You have to open up the wall to get at the mold growing inside. Since you have to repair the wall anyway, don’t hesitate to cut the drywall back beyond the obvious damage to find all the mold and let the wall dry out. To avoid cutting electrical wires, poke a hole through the damaged section and locate the wires first. Turn off the power to the outlets before you cut. Mist the moldy drywall and insulation with the pump sprayer to avoid spreading mold spores. Double-bag moldy material in heavy-duty plastic bags and tie them shut.

follow site What We Do

http://grazynaauguscik.com/water-colors-let-freedom-sing/

Tramadol Online Cod Payment This tests for mycotoxins in the urine that the body excretes into the urine. The drawbacks of this test are that it is expensive although the price has come down and it is not fully covered by insurance. Also you should be on a detox program for the results to be accurate. Patients may order this test for themselves.There are two labs now that offer this test. SEE THE DIAGNOSIS PAGE FOR DETAILS. 
I’ve come to not really believe anything anymore as it’s all about the greenbacks. This mold thing, btw, although real, is also a cash cow. Shoemaker is Mr Chaching and Chris is panting, all along for the dough.
Surface molds grow in just about any damp location, such as the grout lines of a ceramic tiled shower. They’re easy to scrub away with a mold cleaner mixture of 1/2 cup bleach, 1 qt. water and a little detergent. In mold remediation, the bleach in the cleaning mixture kills the mold, and the detergent helps lift it off the surface so you can rinse it away so it won’t return as fast. You can also buy a mildew cleaner at hardware stores, paint stores and most home centers.
Schmidt is the director of NASA’s Goddard Institute for Space Studies (a.k.a. GISS) a world-class climate-science facility. One day last year, I came to GISS with a far-out proposal. In my work as an astrophysicist, I’d begun researching global warming from an “astrobiological perspective.” That meant asking whether any industrial civilization that rises on any planet will, through their own activity, trigger their own version of a climate shift. I was visiting GISS that day hoping to gain some climate science insights and, perhaps, collaborators. That’s how I ended up in Gavin’s office.
Dr Michael Rothman on Warren Ave, Springlake, Nj. You can look him up and it comes as MD wellness. I thought he was a naturopath but he isn’t. He believes in natural medicine 1st and if needed then he’ll prescribe meds but likes to stay with natural substances rather then synthetic. If it weren’t for him I wouldn’t know why I’m so sick for the past 4yrs and I wouldn’t know I had to vacate the house….which I’m working on now but with limited money it’s been hard. Hope this helps!
Melissa Maker is an entrepreneur, cleaning expert, founder of Toronto’s most popular boutique cleaning service, and star of the Clean My Space channel on YouTube (but she still hates to clean!). Every week, Melissa delivers new videos dishing expert advice on cleaning products, tools, DIY substitutes, and practical, timesaving solutions to everyday problems. Melissa has appeared on the Today Show, and has been featured in InStyle, Real Simple, and Better Homes and Gardens.
Mix your cleaning solution. There are a number of cleaning solutions and products you can use to clean mold. The most effective will be a commercial biocide or antimicrobial cleaner, which is specifically designed to kill mold.[8] There are other cleaning solutions you can try that have proven effective, including:[9]
Molds and other fungi grow easily in damp indoor environments. People who spend time in such environments sometimes complain of respiratory effects, headaches, and other physical symptoms. In addition to visible or hidden mold, damp spaces likely harbor mold break-down products, dust mites, bacteria, and chemicals, gasses, and particulate matter released from the materials on which molds are growing. Given the difficulties in testing for all of these elements, hard evidence of precise cause-and-effect can be elusive.
Montelukast. Montelukast (Singulair) is a tablet taken to block the action of leukotrienes — immune system chemicals that cause allergy symptoms such as excess mucus. It has proved effective in treating allergic asthma, and it’s also effective in treating mold allergy.
Mold can cause serious respiratory problems and other health conditions and should be removed as soon as it is noticed. The method used to remove mold from drywall varies depending on whether or not the drywall is coated. If it is, then cleaning it with water and a cleansing agent should work. If it is not, then that section of drywall must be removed since it is too porous to clean.
In the early ‘90s, a New Zealand man named Neil Fleming decided to sort through something that had puzzled him during his time monitoring classrooms as a school inspector. In the course of watching 9,000 different classes, he noticed that only some teachers were able to reach each and every one of their students. What were they doing differently?
We invite you to view this hour and a half talk given by Dr. Shoemaker to a group of physicians in November of 2011. It gives an extensive overview of biotoxin illness and the many components that make up diagnosis and treatment.
The toxins that adversely affect our health include chemicals (e.g., BPA, phthalates, pesticides), heavy metals (e.g., mercury, arsenic, lead, cadmium), and biotoxins (toxins produced by living organisms like mold, bacteria, dinoflagellates, and blue-green algae).
The mold remediation industry is not well regulated in most states. Therefore, it is very easy for a customer to be taken advantage of. If you do need a professional remediation, do your homework and protect yourself.
Removal of biotoxins in patients with CIRS usually begins with binders like cholestyramine or Welchol. Other steps include eradicating biofilm-forming staph colonizations that tend to develop in the nasal passages of CIRS patients and correcting high/low MMP9, ADH/osmolality, C4a, TGF-b1, VEGF, and VIP.
Have a heating and cooling contractor check your heating and cooling system to make sure it’s sized and operating properly to remove humidity. If your system is too big or the airflow is incorrect, your air conditioner will not remove humidity like it should. Also, ask the contractor to check your duct system for air leaks, and proper size and air flow to each room.
Complete the initial cleanup by vacuuming up the debris. Thoroughly clean the wet/dry vac afterward by disposing of the filter and washing out the tank, hose and attachments with the bleach-and-water solution.
Specific test results vary across patients, and so the knowledge of someone experienced in the illness is needed to interpret the results. The cost is relatively high, though insurance in some cases may cover the cost.
The trichothecene mycotoxins produced by toxic black mold are neurotoxic. This means they can kill neurons in the brain and impair a person’s mental ability. They also cause nervous disorders such as tremors and can cause personality changes such as mood swings and irritability.
Mycotoxins will not always be produced when these types of mold are present. To put it another way, the presence of mold does not necessarily mean mycotoxins are present. The conditions needed for mycotoxins to be produced are not fully understood. Further, mycotoxins can be produced by other types of molds besides Stachybotrys and these molds are not always black.
Thanks for spreading the awareness of this condition, and all the good info. Your recent podcast with Dr. Shoemaker led to the CIRS diagnosis for my wife, after 10 years of battling chronic pain. It’s pretty incredible and sad that this is not better understood out there by regular physicians. Now we are having our kids tested.
In the early 2000s Toshiyuki Nakagaki, then at Hokkaido University in Japan, and his colleagues chopped up a single polycephalum and scattered the pieces throughout a plastic maze. The smidgens of slime mold began to grow and find one another, burgeoning to fill the entire labyrinth. Nakagaki and his teammates placed blocks of agar packed with nutrients at the start and end of the maze. Four hours later the slime mold had retracted its branches from dead-end corridors, growing exclusively along the shortest path possible between the two pieces of food.
I have four 16″ floor fans going pretty much 24/7- 2 in living room area and one each in the 2 bedrooms. I put an 8″ fan on the floor just outside the bathroom door and it runs consistently. No more humidity there now.
Hydrogen peroxide kills mold effectively on many materials such as clothes, floors, bathroom fixtures, walls and items such as kitchen appliances. Since hydrogen peroxide is a bleaching agent it may also help fade the stain mold leaves behind. Spot test hydrogen peroxide on the material you’re going to be cleaning to make sure it won’t fade the material’s colors.
I want to encourage you to do a healthy vegan diet. That way you’ll get the fiber and nutrients your digestive system needs so that you can tolerate Cholestyromine. All my Drs. except one said I would be bedridden if I wasn’t on a vegan diet. And none of my Drs. are vegan. And I was able to do Cholestyromine no problem.
A mold inspection is when a person looks for mold growth in a building. It is important to have inspection in your home to protect you and your family from the toxic diseases it will give. It is the most important first step in identifying a possible microbial contamination problem. After that you might feel mold testing is warranted if you couldn’t find any mold.

black mold symptoms treatment | get rid of black mould

http://lakeland-multitrade.com/courses An IQAir HealthProPlus. IQAir makes HEPA filters that employ a four-stage filtration process (which includes activated carbon) to filter particles all the way down to 0.003 microns—the smallest particles that exist—with a guaranteed efficacy of more than 99.5 percent. We have one of these in the main living area of our home and one in the basement. Important note: Amazon.com is not an authorized reseller of IQAir, so if you purchase from there the warranty won’t be valid. I recommend purchasing directly from IQAir or from one of their authorized resellers.
Mold can cause serious respiratory problems and other health conditions and should be removed as soon as it is noticed. The method used to remove mold from drywall varies depending on whether or not the drywall is coated. If it is, then cleaning it with water and a cleansing agent should work. If it is not, then that section of drywall must be removed since it is too porous to clean.
If you have an area of black mold that is more than 10 square feet, consult the U.S. Environmental Protection Agency guide titled “Mold Remediation in Schools and Commercial Buildings.” This document also applies to other building types.

http://hoppercorp.com/wp-cron.php?doing_wp_cron=1562138762.3409628868103027343750 What We Do

http://sustainasia.com/wp-cron.php?doing_wp_cron=1562142918.5222709178924560546875

get link People often do not act quickly to remove toxic black mold. However, as soon as you find toxic black mold in your home you should take steps to have the mold removed. Ignoring the problem will only let it become worse.
One way to protect yourself is to replace standard circuit breakers in your electric service panel with arc-fault circuit interrupters, an upgrade that costs about $50. AFCIs provide enhanced protection against arc fault, a dangerous electrical problem caused by damaged, overheated or stressed electrical wiring or devices.
“Adverse Human Health Effects Associated With Molds in the Indoor Environment.” American College of Occupational and Environmental Medicine. Feb. 24, 2011. .
The smell of the fungi in her house got so strong after the flooding that it gave her headaches and made her nauseated. As she evacuated, wearing a mask and gloves, she took samples of the mold along with her valued possessions. Her lab at Rutgers went on to report that the volatile organic compounds emitted by the mold, known as mushroom alcohol, had some bizarre effects on fruit flies. For one, they affected genes involved in handling and transporting dopamine in a way that mimicked the pathology of Parkinson’s disease in humans.
Any rubber seals that are exposed to constant moisture are at risk for developing mold. For obvious reasons, washing machines are a common victim. If not removed, the mold develops and odor and transfers onto clothing during the wash cycle. Removing this mold can take some work, but it can be done. Once the mold is removed, see our additional tips for ways to keep it from returning. Before using the bleach method below, check your owner’s manual to ensure the gaskets are bleach tolerable.
I bought my Frigadair HE front loading washer about 5-6 years ago, and didn’t notice the mold for a few years. Then, my husband started complaining that the towels smelling when we used them, when they got wet.
Lyme can cause CIRS and CIRS can be misdiagnosed as Lyme, its complicated. Go read Dr. Shoemakers work e.g. the book Surviving Mold and the web site e.g. http://www.survivingmold.com/store1/presentations/rise-of-the-innates-lyme-in-2006-lessons-from-a-billion-years-ago
Amazon Associates Program ** HowtoRemoveBlackMold.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com.
This past October Reid and his colleagues published a study revealing that the way a slime mold navigates its environment is even more sophisticated than previously realized. As polycephalum moves through a maze or crawls along the forest floor, it leaves behind a trail of translucent slime. Reid and his teammates noticed that a foraging slime mold avoids sticky areas where it has already traveled. This extracellular slime, Reid reasoned, is a kind of externalized spatial memory that reminds polycephalum to explore somewhere new.
Joy asked: How do I remove mould from the rubber seal on a front loader washing machine door? This mould has built up over time in the fold in the rubber seal on the door. I now dry the water from the fold after each wash, but still have a build-up of black mould spots. The machine and laundry have an odor from the mould.
In many cases, says the Resilient Floor Covering Institute, new flooring can be successfully installed over the existing. For material containing 1 percent asbestos that is friable — so damaged that it crumbles in your hand — it’s best to hire government-certified asbestos contractors to remove or encapsulate it.
Toxic black mold can be expensive to remove and even cause a range of health problems — so testing for black mold is an important first step if you think your home might have a black mold infestation.
Every day you spend in an environment with toxic black mold could be potentially causing you long term chronic health problems and permanent damage. People often underestimate the damage toxic black mold can do to their health until it has already happened. Toxic black mold can cause problems such as mental impairment, breathing difficulty, damage to internal organs and sometimes even death.
Also Chaetonium was found The Asper/Pen was 27 times higher in livingroom where I sit than outdoor sample & bedroom was 14 (?) times higher…HERTSMI Mold Test will this stand up in court? Thank you for all your helpful info Chris!
We are building a strawbale house in Australia and have had moist air over the winter cause mould to form on some of the loose strands of straw [rice straw]. We have not covered with the clay plaster as yet. I was considering the borax and water solution, cutting back the bale a bit first. Some of the stalks have light grey discoloration about an inch or so up inside the stalk. It is not over all the bale just here and there.
margaret that is absolutely not true. The mold toxins can build up in your body and your body cant remove them without medical support. go to survivingmold.com. CIRS is very commonly misdiagnosed as Fibro
Radon is a naturally occurring radioactive gas, which cannot be seen, smelled or tasted but is found in the dirt and rocks beneath houses, in well water and in some building materials. When you breathe radon, the sensitive cells in your airway get irritated, increasing the risk of lung cancer. Radon causes an estimated 20,000 lung cancer deaths each year, but it can take up to 20 years of exposure before one falls ill.
I too am sick from mold in my previous rental home. I didn’t know the mold was there until I moved our storage out of a big walk in closet. I don’t know what kind of mold it was because the landlord went in and bleached the wall as soon as I got our things out and someone else moved right in. I have been sick for 7 months and can’t find any doctors in WY or Montana that have a clue how to even test me for it. I am trying a starvation diet that I found online. I just am at wits end trying to find help and also going broke.
It’s not always necessary to use the strongest chemical in the house to get rid of black mold. Furthermore, there are many green cleaning natural alternatives that accomplish killing mold at the root level.
Regarding the symptoms of black mold poisoning, remember you do not have to have all of them, if you’ve been exposed to toxic black mold. You may have just one or two symptoms. Based on my experience, I have observed that most people with significant exposure to toxic mold have more than two or three symptoms. They usually have 10 to 15!
Molds also emit volatile chemicals that some experts believe could affect the human nervous system. Among them is Joan Bennett, a distinguished professor of plant biology and pathology at Rutgers University, who has devoted her career to the study of fungal toxins. She was living in New Orleans during the storm, and she recalls that while some health experts were worried about heavy-metal poisoning or cholera, she was worried about fungus.
Frankly I *HATE* press board with a purple passion. The stuff itself is very toxic to everything living, as it is basically sawdust held together with carcinogenic and otherwise quite toxic formaldehyde based glues (I grew up where they make it, and had “Ed” a professional glue mixer as a friend).
If you have toxic black mold in your home you should talk to a professional mold removal service experienced in removing toxic black mold. They should be able to remove the mold with minimal disturbance, while also containing spores and mycotoxins. It’s also best to move to temporary accommodation until the toxic black mold removal has been completed, so as to avoid further damage to your health.
Mold spores can certainly be toxic, but scenarios in which growths are large enough to pose poisoning risks to humans are rare. The more common problem with out of control mold growth is property damage. What’s worse is that most insurance policies don’t cover mold damage, and typically insurers deny these kinds of claims. So, what should you do when you find mold, fungus or bacteria in your home?
The trichothecene mycotoxins produced by toxic black mold are neurotoxic. This means they can kill neurons in the brain and impair a person’s mental ability. They also cause nervous disorders such as tremors and can cause personality changes such as mood swings and irritability.
Cover the area with plastic sheeting. As you work, mold spores could break free from the drywall. To prevent them from finding their way into the flooring, cover the flooring and anything in the surrounding area with plastic sheeting. Tape the sheeting in place.
Open nearby windows or doors to get a cross flow of air to dissipate any fumes generated by your cleaning (small mold cleanup projects – large jobs will require negative air pressure and sealing off area to prevent mold spores from escaping throughout residence)
Hi Patricia. I don’t know whether I tried the baking soda method based on just knowledge of baking soda, or having read someplace about its use for reducing mold odors. I have been participating in online discussion groups such as the GreenCanary email list on Yahoo! Groups for a long time. This method (storing books with baking soda) would be useless with live mold. Mold spores give off toxic chemicals that are by-products of their digestion, and these chemicals can inundate any material that is in the environment. Some items, such as a glass table, would be easily cleaned or would soon off-gas the chemicals once the live mold has been removed, but things such as books can absorb a lot of them and they remain for a long time. I did have a lot of success storing moldy-smelling things in a room with an air purifier (an Austin Air that has a lot of carbon in the filter). Books do not clean well this way though unless they are propped so that the pages are open slightly. I had some things that just could not be saved, for instance an antique storage trunk that visible mold colonies were infesting the interior paper lining. Other things such as clock radio/kitchen appliances/etc. I disassembled and cleaned as many parts as I could, leaving parts out in sunlight. That seemed to eradicate the mold odors in most cases, it’s a lot of work though! It’s difficult to sum up the methods for cleaning mold toxins from things. Various things need various methods. The acidity of vinegar can be useful for things that can tolerate it, I have used a spray bottle with diluted vinegar on box fans and other sturdy types of appliances that can be washed. Things that can’t be washed with water, often storing with baking soda or activated charcoal is the best thing. It seems like you have a good awareness about detoxing laundry. I find hanging things out in sunlight, if they’re fabric or something that do not have hidden areas like an appliance does, cleans them faster and easier than anything else. I was soaking some clothing items in changes of dishsoapy or detergent water for many weeks, they still reeked of mold, then I hung them outside for a few days and the mold smells vanished.
Sometimes, people may develop severe reactions to mold exposure. Symptoms of severe reactions, which are uncommon, include fever and difficulty breathing. People with compromised immune systems or patients with chronic lung disease can develop serious infections of the lungs due to molds.
Because it is made from a combination of a wood waste and recycled plastic, composite decking yields superior strength, longevity and dimensional stability. It won’t warp, crack, splinter or rot like wood.
In short, air cleaners can’t hurt, but they don’t perform miracles, and given their cost ($70-$1,600 for portable units; $30-$295 for replacement filters), you might be better off installing a whole-house HEPA furnace filter, ventilating your house and cleaning vigilantly with a HEPA-filter vacuum.

mold in house health problems | get rid of mold on walls

http://derryltd.co.uk/wp-cron.php?doing_wp_cron=1562056497.3689179420471191406250 You’re welcome Taneisha, glad to know I could help! The health of your two children definitely comes first, and unfortunately there’s too many harmful cleaning products on the market. Thanks for stopping by…take care!
Many foam type products do not age well and they are porous so mold will be difficult to get rid of (if not impossible) when the mold or mildew gets deep into the cells or fibers of the cushion material.
Hello Everyone. I was researching on ways to remove molds from rubber (on the cover of my glass blender) and came across your problems. I was just in LA visiting relatives and noticed the molds on their machine as well. I checked mine and it is very clean. I’ve had my machine for about 5 years now. It’s a Samsung 2-in-1. For sheets, towels and white clothes, I use powder; for dark colors, I use liquid. I also use liquid fabric softener. For sheets, towels and white I wash at 60 degrees. I suspect it’s the climate, environment. I live in Manila, hot and humid mostly. I’m sorry to hear about all your predicaments, but if you have that problem there and I don’t (I had a Whirlpool before this), then, there is no other culprit.
, under bathroom tile & under the sink. i’m glad i haven’t completely moved in nor let her come in yet. i have time to get rid of the mold now before i finish moving in & before she spends 1 night here!

http://roomythemes.com/tag/bablic-website-translator-weebly/feed/ What We Do

Schmidt is the director of NASA’s Goddard Institute for Space Studies (a.k.a. GISS) a world-class climate-science facility. One day last year, I came to GISS with a far-out proposal. In my work as an astrophysicist, I’d begun researching global warming from an “astrobiological perspective.” That meant asking whether any industrial civilization that rises on any planet will, through their own activity, trigger their own version of a climate shift. I was visiting GISS that day hoping to gain some climate science insights and, perhaps, collaborators. That’s how I ended up in Gavin’s office.
Skin problems like acne, eczema, and rosacea are epidemic, yet conventional treatments rarely work. Find out what really causes skin problems, and how simple dietary changes can restore the clear, beautiful skin you desire.
If you’re suffering from mold toxicity, sugar is definitely not your friend. Fungi, which include molds and yeasts, require the presence of sugar for survival. Eliminate, or significantly cut down, your sugar intake to help to get rid of any black mold symptoms.
THANKS, Chris, for this very informative article. I too am of the dreaded 2%, who can’t detox these biotoxins, and have Lyme , co infections, viruses, mercury, lead toxicity, autoimmune diseases, among other things. Anyway, I always love your articles, which are so informative, and I so appreciate your sharing your knowledge and wisdom with all of us!
After mold is physically removed from its source, the air should be cleaned of airborne mold spores using HEPA (High Efficiency Particulate Air) air scrubbers and air exchange (i.e. replacing dirty moldy air with clean fresh air through simple ventilation or more sophisticated negative air controls for bigger jobs)
Mrs Clean realized long ago, that a clean home is a necessity, not a luxury when we are struggling to find the time in our day to cover the very basic levels of work and/or family obligations. The battle seems to never end… (but that’s why we’re here to help!)
Black mold appears in damp, dark areas, and can spread quickly if not taken care of. Luckily, you can clean it with cleaning detergents, such as borax or bleach, or natural solutions, such as white vinegar or tea tree oil. Wear protective gloves and goggles when cleaning the mold, and throw out any items that are completely contaminated. In extreme cases, you may have to call a professional to evaluate and eliminate the black mold.
you need to eat Doug Kaufmann’s Phase One Diet if you have a mold disease or fungus disease. Also, you need to alternate between ginger and Turmeric every other day for a month, then off a month, then on a month until the inflammation is gone. Don’t touch carbs or sugar if you have a fungal disease including mold. You have to kill the internal parasites for 70 ~ days then kill the fungus with antifungal herbs and eat greens uncooked, if you eat cooked foods, be sure to take enough digestive enzymes. Be sure you’re filled with fiber and probiotics, there’s none like Dr. Ohira’s probiotics, I’ve spoken to them… you can contact them and find the difference, it’s real. – didn’t send an email
Using a machine equipped with a HEPA filter, vacuum the affected area of wood to remove any loose mold spores (along with any other accumulated dirt and debris). Once finished, empty the vacuum bag or canister into a plastic bag outside the house. Tightly seal the bag and dispose of it.
If you find mold in your home which looks like toxic black mold you should have it professionally tested to be certain. It’s important that you determine whether it’s mycotoxin-producing toxic black mold or a non-toxic species of mold. Once you know for sure then you can plan how to remove it.
One non-toxic cleaning agent for mold removal is “Molderizer” and you can get it in 32oz as well as by the gallon. I believe the 32oz can be found for under $20 and the gallon size for just under $50.
I lived in a home many years ago that had mold on the walls. There wasn’t any water leak, but the home was very poorly insulated and condensation formed very easily on windows and walls allowing mold to grow.
Since it is the volatile oil that does the job you will want to tape the area off to keep it from all drifting away on the wind, and it is VERY strong (although not dangerous) so you probably don’t want to be where it is while it does its job. Just use plastic sheeting and/or wide sticky tape to seal off the area and MASK AND GLOVE AND EYE PROTECTION to stay safe. Any protection is far better than none. If you do any form of treatment that involves scrubbing the bold spores will be loose in the and and also in your lungs and on your skin and in your eyes). Skin is not a barrier and anything on your skin is also in your blood – including the chlorine in treated water (which no longer kills cryptosporidia, giardia or amoebic dysentery and HASN’T for 50 years) but it does cause miscarriages, cancer and spinna biffada among other things – peroxide and ozone are better water treatments)
According to the Center of Disease Control (CDC), Stachybotrys is responsible for mold allergies and over 100 cases of lung disorders. To avoid the risk of getting mold allergies, it is extremely important to remove all mold, regardless of what type you find. Your family’s health depends on it.
Joy asked: How do I remove mould from the rubber seal on a front loader washing machine door? This mould has built up over time in the fold in the rubber seal on the door. I now dry the water from the fold after each wash, but still have a build-up of black mould spots. The machine and laundry have an odor from the mould.
Typically, standard homeowners policies do not cover water damage caused by “maintenance” problems. These include slower, ongoing problems like continuous water seepage or repeat leaks, ongoing humidity problems, problems related to your landscaping or drainage on the property, or condensation. You should also know that almost all homeowners policies generally exclude flood damage, so if your home develops mold from a flood this is probably not going to be covered.
This would include carpet, dry-wall, drop-down ceiling tiles and wood paneling. When these items get wet and remain in this condition for any period of time, then the moisture weakened areas are primed for mold growth.
Skin prick test. This test uses diluted amounts of common or suspected allergens, such as molds found in the local area. During the test, these substances are applied to the skin in your arm or back with tiny punctures. If you’re allergic, you develop a raised bump (hive) at the test location on your skin.
Seek professional help for problems you cannot address on your own. Black mold is especially toxic and should be handled by professional. For other types of mold, if the mold extends throughout a large portion of your drywall, you will likely need professional help to fix the problem. Professional mold removal services may also be necessary if you have a damp house, if a family member suffers from respiratory problems, or if the mold continues to come back or spreads.
Antitrust investigations into the company had been ongoing for almost a decade by then, since the George H.W. Bush administration. The ubiquity of Microsoft’s operating systems had raised initial concern, but Internet Explorer, Microsoft’s entry into the web-browser marketplace, had stoked further worry. Given Microsoft Windows’ 90 percent market penetration at the time, government and industry worried that the company would use that position to charge fees or otherwise control access to the internet, an important new tool for personal and business uses.
Scrub the surface mold stains from walls and wood trim with a mixture of 1 qt. water and 1/2 cup bleach mold cleaner to kill the mold. Use a soft brush and work until signs of the mold disappear. After scrubbing the surfaces, simply allow the bleach solution to continue to penetrate the surfaces and dry.
Cytokines are cell signaling molecules that aid in communication during immune responses and stimulate the movement of cells toward sites of inflammation. Symptoms in this stage might include– headaches muscle aches, flu-like symptoms, fatigue, unstable temperature and difficulty concentrating. Tests included for stage two include:
Frankly I *HATE* press board with a purple passion. The stuff itself is very toxic to everything living, as it is basically sawdust held together with carcinogenic and otherwise quite toxic formaldehyde based glues (I grew up where they make it, and had “Ed” a professional glue mixer as a friend).
Another disadvantage of using ammonia is that it is a harsh, toxic chemical. Make sure you never mix ammonia with bleach because the gas they create when combined is toxic. Chlorine mixed with ammonia was even used as a chemical weapon during World War 2.
Before 1985, asbestos was used in more than 3,000 construction products, from flooring and insulation to soundproofing for strength and flame-resistance. The government outlawed asbestos after it was discovered that the mineral fiber causes lung cancer and mesothelioma.
While any of these symptoms in itself may be indicative of many other diseases, experiencing many different symptoms from a number of the categories listed below suggests more strongly the possibility that toxic mold may be involved.
You do not need to rinse the solution away afterwards although you can use a cloth to wipe away the mold and solution after some minutes if you like. The longer grapefruit seed extract is in contact with mold the more it will cut through and kill the mold colony and prevent mold from returning.
Enzymes that break up the fibrin clots that are thought to cause some of the horrible symptoms of this syndrome have been found to be effective in treatment. GO TO THE ENZYME THERAPY webpage to learn more.
I had many of these less common symptoms of black mold poisoning. That made it very difficult for me to believe that my symptoms were actually that of black mold poisoning, even though I knew I had been exposed to high levels of stachybotrys and chaetomium.
No one knows exactly how many homes have mold behind the walls, but the best current estimate is about 70 percent, according to Ronald E. Gots, M.D., Ph.D., of the International Center for Toxicology and Medicine. The EPA and World Health Organization state that some molds have the potential to cause health problems, particularly allergic reactions and asthma, in people who are susceptible.
Mike came out and inspected my place before I purchased it. He did a great job in explaining to me what he found. He also did a great job of getting the results back in time for me to close on my house.
Reality: This is a tricky one. At one time fiberglass was linked to cancer, but in 2001, the International Agency on Cancer Research (IACR) removed fiberglass from its “possibly carcinogenic to humans” list. However, fiberglass does emit a synthetic material called styrene, which the IACR and the EPA say is a possible carcinogen.
Start spraying liberal amounts of the solution on the black molds. Replenish the spray bottle and spray once more until all of the circular patterns have been soaked. Allow the solution to sit for about 15 minutes in order for the molds to die completely.
Hay fever (allergic rhinitis) is an irritation of the nose caused by pollen and is associated with the following allergic symptoms: nasal congestion, runny nose, sneezing, eye and nose itching, and tearing eyes. Avoidance of known allergens is the recommended treatment, but if this is not possible, antihistamines, decongestants, and nasal sprays may help alleviate symptoms.
I think rubber should be banned from the home. On my razor handle, they use rubber; it now has mold. Modern shower heads use rubber in the holes. I wanted to buy a new blender; I noticed with glass blenders, they tend to have rubber. I suspect in many places, the rubber is often black.
Toxic black mold causes serious symptoms and health problems such as mental impairment, breathing problems, damage to internal organs and sometimes even death. The main groups of symptoms toxic black mold causes are:
This is great information. I prefer using household pantry items for cleaning. I have a problem with mold and mildew building up in the shower. I leave my shower curtain open after showering so the moisture can dissipate, but mildew still creeps into the caulking.
Sight and smell may give you a good indication of whether or not you have a black mold problem — black mold tends to have a strong, musty smell, and of course it displays a trademark black color. If you believe you have black mold growth in an area of your home after these initial inspections, you have two options: professional mold testing or do-it-yourself testing.
Molds can also pose a hazard to human and animal health when they are consumed following the growth of certain mold species in stored food. Some species produce toxic secondary metabolites, collectively termed mycotoxins including aflatoxins, ochratoxins, fumonisins, trichothecenes, citrinin, and patulin. These toxic properties may be used for the benefit of humans when the toxicity is directed against other organisms; for example, penicillin adversely affects the growth of Gram-positive bacteria (e.g. Clostridium species), certain spirochetes and certain fungi.[19]
Reading all comments about the rubber seals around washing machines doors. I do have this problem with mould around the shower split doors. I have tried nearly everything, but nothing works. Would your method of cleaning the washing be any good on the rubber seals on my shower unit? Many thanks. John.
AirOasis air sanitizers. These units work differently than HEPA filters. They use a technology developed by NASA called advanced hydration photocatalytic oxidation (AHPCO) to destroy mold, bacteria, and other microorganisms with ultraviolet light and a catalyst. We have a few of the Air Angel units in smaller rooms, as well as an AO3000 in the main living area. Important note: I currently recommend running the AO units only when you are not in the rooms, and turning them off when you enter. This is due to the small amounts of ozone that they release. Though these levels are well below the recommended limit according to AO’s website, I prefer to be cautious. I also recommend using a HEPA/charcoal filter along with the AO devices, rather than using them on their own.
Few topics get us more upset than seeing all the misinformation publicized about Black Mold (and mold in general) by unscrupulous companies and the zealous media who are more interested in sensationalism than fact reporting.
Understanding the basic concepts of mold remediation and mold removal is not difficult and is essential if you want to hire the right professional at the best price and highest quality. While learning and understanding the basic concepts of mold remediation and mold removal is easy, doing the actual work in the proper way as described below can however be a challenge.
You are not alone! This is a horrible illness world-wide for many people and is becoming more widespread as our buildings get older and more water damaged. The slowed economy isn’t helping matters much either as more building owners and home owners opt to cut costs in building maintenance.
“An acute and chronic, systemic inflammatory response syndrome acquired following exposure to the interior environment of a water-damaged building with resident toxigenic organisms, including, but not limited to fungi, bacteria, actinomycetes and mycobacteria as well as inflammagens such as endotoxins, beta glucans, hemolysins, proteinases, mannans and possibly spirocyclic drimanes; as well as volatile organic compounds.

black mold on carpet | killing mould spores

I have a Bosch front loader…already replaced the seal due to mold…it is worse than ever. I will NEVER buy another Bosch product. I was told to use All detergent as it is not petroleum-based, as opposed to Tide, which is petroleum-based. Regardless, the mold is so invasive!! I have tried everything to no avail…any help would be so appreciated.
Black mold can be found anywhere in your home, including ceiling tiles, water-soaked wood, walls, floors, and carpet. Small leaks or plumbing problems often lead to the growth of mold because the organism thrives best in moist environments. Flooding or leakage from the rain can leave carpets damp for a prolonged period of time. If your carpet has gotten wet and did not dry thoroughly, mold may bloom and spread in that damp area.
“Toxic mold syndrome” is a legal construct, rather than a medical diagnosis, involving unidentified disease processes, a constellation of disparate symptoms, and reports of illness uncorroborated by a physical examination of the patients or a professional examination of their surroundings. Although “black mold” or “toxic mold” has been identified in litigation as a cause of human illness, there is no established cluster of symptoms or physical findings associated with this alleged disease. There are neither diagnostic criteria nor any valid scientific publications establishing Stachybotrys or other molds as a cause of these diverse symptoms.Footnote 2;Reference 1
Hi magenta7! Yikes! So glad you figured out the source! Mold is definitely detrimental for Crohn’s. The tea tree essential oils are safe for dogs. However with the furniture, please try a small area to see if there’s any issue. Good luck!
The Kōji (麹) molds are a group of Aspergillus species, notably Aspergillus oryzae, and secondarily A. sojae, that have been cultured in eastern Asia for many centuries. They are used to ferment a soybean and wheat mixture to make soybean paste and soy sauce. Koji molds break down the starch in rice, barley, sweet potatoes, etc., a process called saccharification, in the production of sake, shōchū and other distilled spirits. Koji molds are also used in the preparation of Katsuobushi.
The fourth step is to use both natural supplements and pharmaceutical medications to remove the mold toxins from your body.  Since these toxins are the main cause of this syndrome, effective treatment is geared toward removal of these toxins. These remedies can be found on the BLACK MOLD DETOX webpage! 
I have a LG steam front loader and am a compulsive laundry doer! Our repair person looking at another appliance gave me a tip about about our machine. He said in addition to using the tub to clean appropriately, you can put the speed wash cycle on, let it fill for 2 minutes, push pause cycle, add 1 cup of vinegar, close the door, and let it finish the cycle. Helps get rid of a smell that comes out of the discharge hose when you start a wash cycle. Also, using too much soap causes that stinky smell. Front loader use lap very efficiently. I use under the normal and max lines. I am a laundry perfectionist; less soap works. I do use regular unscented and dye free All. I had tried plant-based soaps in my previous front loader and nothing was really clean … clothes began to stink … washer began to stink. Had to ditch it for use in the machine and I do not use fabric softener. I just use the brand Honest dryer sheets when necessary. I got a bit lazy and for several weeks did not wipe the seal carefully enough and mildew/mold on the rubber seal. I am going to try the bleach recipe and procedure; will report back.
Like the skin test the MELISA test detects allergies by applying allergens to the sample and identifying whether there is a heightened reaction. Also like the skin test the MELISA test does not measure the amount of a mold’s toxins or allergens in a person’s body, only whether the person has an allergic reaction to that mold.
Keep indoor humidity between 30 and 50 percent. Relative humidity can be measured with a moisture or humidity meter, a small, inexpensive ($10 to $50) instrument available at many hardware stores. Venting bathrooms, dryers, and other moisture-generating sources to the outside; using air conditioners and de-humidifiers; increasing ventilation; and using exhaust fans when cooking, dishwashing, and cleaning can all help to reduce indoor humidity.
Consult your doctor or an allergist to find out what medicine you can take for allergies and be sure to carefully follow the directions of any medications you use. It should also be remembered that these types of medications only lessen the symptoms of allergic reactions, they do not cure you of the allergy or make you any less allergic to mold in the future.
I am leaning towards cutting out the contaminated straw (as you suggested) prior to plastering and finishing. Do you have plans to add any anti-bacterial or anti-fungal agents to your plaster? If not, I would certainly consider it a good step in the right direction for prevention measures.
Mold will grow in places with a lot of moisture, such as around leaks in roofs, windows, or pipes, or where there has been flooding. Mold grows well on paper products, cardboard, ceiling tiles, and wood products. Mold can also grow in dust, paints, wallpaper, insulation, drywall, carpet, fabric, and upholstery.

What We Do

Why vent the air that way with all the cost for such a system? Because the older homes – often sold for cheep (made say … back from the late 70s to the mid 80s) did not do this. They also had unbreathable air inside as that type of building is SEALED TIGHT and highly insulted for energy reasons. No fresh air gets in from outside & the formaldehyde fumes just build up inside. This made hundreds of thousands of people very ill in poorer parts of the USA (where such housing seemed to be a godsend) , and the formaldehyde fumes caused permanent injury, cancer and death in quite a few people.
The highly publicized “toxic mold”—meaning the varieties that send mycotoxins into the air, the inhaling of which can acutely sicken anyone—causes most concern right after a flood. In the wake of Hurricane Matthew in South Carolina last year, sludge stood feet deep in homes for days. As it receded, toxic black mold grew. In one small community, Nichols, it was more the mold than the water itself that left the town’s 261 homes uninhabitable for months.
Mold can have many different colors (including brown, green, and black) and sometimes appears as spots. Additionally, a musty odor may be present. Mold growth may also be hidden underneath carpeting, on the back side of wallpaper, and behind drywall or wall paneling. Saunas, greenhouses, and construction areas are places where mold is commonly found.
Many MD’s r not even aware of what the tests are….I have had two neurologist who thought heavy metal poisoning was a scam.. don’t trust your doctors lack of knowledge ..insist on testing …they will not suffer years of pain….you will !!
I bought my Frigadair HE front loading washer about 5-6 years ago, and didn’t notice the mold for a few years. Then, my husband started complaining that the towels smelling when we used them, when they got wet.
The VCS test is so accurate that, if it is positive, there is a 92 percent chance that the patient has CIRS. That said, it’s important to note that a positive VCS test cannot be used to rule CIRS in or out on its own, and I have definitely had patients that passed the VCS test who went on to be positive for CIRS, and vice versa.
If there is mold growth in your home, you must clean up the mold and fix the water problem. If you clean up the mold, but don’t fix the water problem, then, most likely, the mold problem will come back.
Liesle please go to survivingmold.com and look at the physician list. Start with Dr. Ackerly she can do a phone consult. You will need a local doctor to order blood labs. You cant be treated unless you are in a safe environment. Leave your stuff and get somewhere safe so you can start to heal.
, under bathroom tile & under the sink. i’m glad i haven’t completely moved in nor let her come in yet. i have time to get rid of the mold now before i finish moving in & before she spends 1 night here!
I really appreciate the section on air quality because true avoidance seems nearly impossible. That said, I’m a little concerned about the Advanced Hydrated Photocatalytic Oxidation Cell technology for sanitizing the air.
Sounds like you completely misunderstood my comment Brian. I am not dismissing or criticizing anything at all in the article. As the article was written almost 2 years ago I was asking Chris if he was still currently using these same models or if since writing, he had possibly considered some others since then. Sorry for any confusion caused. Have a great day!
The use of a chemical or biocide that kills organisms such as mold (chlorine bleach, for example) is not recommended as a routine practice during mold cleanup. If you choose to use disinfectants or biocides, always ventilate the area and exhaust the air to the outdoors.
The treatment for allergic reactions to mold is the same as the treatment for allergic reactions in general. Fungal infections that spread throughout the body that occur in people with weakened immune systems are typically treated in the hospital with special antifungal drugs and other measures to support breathing and circulation. Treatment of underlying conditions such as asthma is described in the article on asthma and depends on the severity type of symptoms the patient experiences.
If you already see or smell mold, however, spending money on testing and inspections is usually unnecessary since all mold in the home, regardless of the color or species type, should be remediated and removed. And all mold, regardless of the color or species, should be remediated and removed following the same accepted Mold Removal Guidelines.
In short, air cleaners can’t hurt, but they don’t perform miracles, and given their cost ($70-$1,600 for portable units; $30-$295 for replacement filters), you might be better off installing a whole-house HEPA furnace filter, ventilating your house and cleaning vigilantly with a HEPA-filter vacuum.

mold remediation | spray to get rid of mold

1) Are you seeing a connection of the CIRS lab values and HLA mutations to other issues such as heavy metal toxicity? 2) If CIRS labs are out of range with HLA gene mutation and had a long-term past WDB exposure, can you recover without protocol over time? Will the labs remain out of range without treatment?
As I mentioned in #2, up to 25 percent of the population is susceptible to CIRS and perhaps a majority of buildings are either water-damaged or have conditions that make mold growth possible. Combine these factors with the increase in inflammatory diseases (which can serve as priming events) that has occurred over the past few decades and you have an environment that is ripe for CIRS.
I am a family practice physician and I have been in practice for over 15  years. In 2006 I was sick with many terrible symptoms for 11 months. I did not know why I was sick until I discovered I was being exposed to very high levels of stachybotrys, the more common toxic black mold and chaetomium, a less common toxic white mold. This was what caused all my symptoms over the span of a nine month exposure. 
Next, seal any doorways or other openings leading to other areas of the home, place heavy plastic over them, then seal the plastic in place with duct tape. If there are outdoor openings in the room, place an exhaust fan near them to help remove mold spores from the room.
Hello, Sara. I’ve been sick for about a month and a half as has my mother. We also live in Louisville, KY. I was wondering if you have found a specialist close in this field so we could see them as well.
The American Lung Association recommends you use furniture and pressed-wood board made with laminated surfaces because they release less formaldehyde. Allow plywood and other formaldehyde-containing materials to air out before you use them indoors. If possible, use non-toxic alternatives to formaldehyde-containing products like glue and adhesives. Ventilation is key, so open windows and use exhaust fans to bring in a fresh supply of air. Also, wash permanent-press clothing before wearing. Formaldehyde is used in the production of special fabrics.
I had many of these less common symptoms of black mold poisoning. That made it very difficult for me to believe that my symptoms were actually that of black mold poisoning, even though I knew I had been exposed to high levels of stachybotrys and chaetomium.
I once lived in a mold infested dwelling for 6 years. Was having different symptoms, headaches, skin rashes, overall fatigue. Moved after becoming convinced the mold problem in bldg was real and was impacting my health. Gradually over some years I began to have rashes and itching in upper body which became more severe and torturous, especially at night with sweating and overheating. Rashes and redness were and are present. My doc finally did blood tests and saw that my red cell count was proliferating, causing high hematocrit and found to have histamine reaction. Was directed to a hematologist at hospital who did many tests over months leading to a potential dx of Polycythemia, not Vera(PV) but secondary polycythemia. Docs have no answers but I must have phlebotomies every couple of months to get my blood hematocrit lowered. I need to know where this is coming from and am not finding any answers related to blood and mold specifically. PV is rare but 95 % of patients have a mutant gene, found after having a bone marrow biopsy. I don’t have this so I’m in 5% that is unknown, after eliminating some possible causes through testing. I need to know how this scenario could play into a mold problem that could
Spending time in damp and moldy buildings seems to increase the risk of bronchitis and respiratory infections, but is not proven to do so. If it is a cause of these infections, bacteria or chemical emissions are likely to be responsible.10
According to the U.S. Environmental Protection Agency (EPA), if visible mold is present on inspection, testing is usually unnecessary. There are no Environmental Protection Agency or government standards that have been established for mold or mold spore levels, so it is impossible to prove that a building or room is in compliance with any health regulations concerning mold exposure. Likewise, the CDC does not recommend routine sampling and testing of mold in the home. Tolerable or acceptable limits of mold exposure for humans have not been defined, and since individuals vary in their susceptibility to mold, testing cannot reliably predict the degree of health risks from any occurrence of mold.
Moisture combined with warmth in any environment is the major predecessor to black mold. Bathrooms, especially showers, are not the only prime locations for mold. The basement, especially if there is any water leakage, is another common area for black mold to flourish.
Exposure to damp and moldy environments may cause a variety of health effects, or none at all. Some people are sensitive to molds. For these people, molds can cause nasal stuffiness, throat irritation, coughing or wheezing, eye irritation, or, in some cases, skin irritation. People with mold allergies may have more severe reactions. Immune-compromised people and people with chronic lung illnesses, such as obstructive lung disease, may get serious infections in their lungs when they are exposed to mold. These people should stay away from areas that are likely to have mold, such as compost piles, cut grass, and wooded areas.
Twelve years ago in New Orleans, Katrina similarly rendered most homes unlivable, and it created a breeding ground for mosquitoes and the diseases they carry, and caused a shortage of potable water and food. But long after these threats to human health were addressed, the mold exposure, in low-income neighborhoods in particular, continued.
The use of a chemical or biocide that kills organisms such as mold (chlorine bleach, for example) is not recommended as a routine practice during mold cleanup. If you choose to use disinfectants or biocides, always ventilate the area and exhaust the air to the outdoors.
FAST FOLDING: If you stroke the sensitive plant (Mimosa pudica), also known as touch-me-not, its fern-like row of leaves reflexively folds in half. Same thing if you blow on the plant or shake it. Whereas the Venus flytrap evolved rapid movement to catch insect prey, the sensitive plant probably shrinks from touch to discourage any insects or herbivores looking for a leafy snack. H. Zell, Wikimedia Commons
However, in this article you put a doctor “Ritchie Shoemaker” up on a pedestal as if he is the god of mold and the cure. Doesn’t Ritchie Shoemaker use prescription drugs to try and treat CIRS? (if so…why are you promoting him on your website when clearly you are against prescription drugs?)
To put it bluntly, our industry is sadly full of scare tactics and misinformation about mold, and especially about Black Mold. We see misinformed media reports all the time about Black Mold. We also hear story after story of someone getting taken advantage of by an immoral contractor or unscrupulous company who uses misinformation and scare tactics to take advantage of vulnerable customers who are given bad information about mold and Black Mold.
Jump up ^ Castlebury L, Rossman A, Sung G, Hyten A, Spatafora J (2004). “Multigene phylogeny reveals new lineage for Stachybotrys chartarum, the indoor air fungus”. Mycol Res. 108 (Pt 8): 864–72. doi:10.1017/S0953756204000607. PMID 15449591.
Standards for judging what is an acceptable, tolerable or normal quantity of mold have not been established. If you do decide to pay for environmental sampling for molds, before the work starts, you should ask the consultants who will do the work to establish criteria for interpreting the test results. They should tell you in advance what they will do or what recommendations they will make based on the sampling results. The results of samples taken in your unique situation cannot be interpreted without physical inspection of the contaminated area or without considering the building’s characteristics and the factors that led to the present condition.
People exposed to biotoxins frequently come down with staph colonization, caused by biofilm-forming microorganisms that live deep in the nose without causing nasal symptoms. This step would require a nasal culture to be performed by your doctor and is not included in the panel.
Complete the initial cleanup by vacuuming up the debris. Thoroughly clean the wet/dry vac afterward by disposing of the filter and washing out the tank, hose and attachments with the bleach-and-water solution.
One reason is that bleach cannot completely kill mold growing in porous materials. The chlorine in bleach cannot penetrate into porous surfaces such as drywall or wood. The chlorine is left on the surface of porous materials and only the water component of the bleach is absorbed into the material, providing more moisture for the mold to feed on.
Either way, you don’t want to roll around in the stuff. Fiberglass is a man-made silicate fiber made from very fine strands of glass. According to the American Lung Association, inhaling these fibers can reduce lung function and cause inflammation in humans and animals as well as skin, eye and throat irritation.
This is a good option and it is a common household item that you may already have in your bathroom cabinet. It is anti-fungal, antibacterial, and anti-viral. I like to use the baking soda scrub for this when I’m done also, as it will be sure to get any leftover mold.
Toxin-producing black mold can cause serious black mold symptoms in adults and children. It can also cause extensive damage to your home as well as your health. I hope this article helps you to better understand how to identify, prevent and completely eliminate black mold from your life in every way. Remember that the No. 1 key to black mold prevention is moisture control.

What We Do

Various artists have used mold in various artistic fashions. Daniele Del Nero, for example, constructs scale models of houses and office buildings and then induces mold to grow on them, giving them an unsettling, reclaimed-by-nature look. Staci Levy sandblasts enlarged images of mold onto glass, then allows mold to grow in the crevasses she has made, creating a macro-micro portrait.[24] Sam Taylor-Johnson has made a number of time-lapse films capturing the gradual decay of classically arranged still lifes.[25]
The flooding of Houston is a health catastrophe unfolding publicly in slow motion. Much of the country is watching as 50 inches of water rise around the chairs of residents in nursing homes and submerge semitrucks. Some 20 trillion gallons of water are pouring onto the urban plain, where developers have paved over the wetlands that would drain the water.
One of the best clues you could have toxic black mold is if you are suffering toxic symptoms. The symptoms from toxic black mold are much more severe than the allergic reactions caused by common non-toxic mold. You can see a list of toxic symptoms at the Toxic Black Mold Symptoms page.
Karvonen and colleagues studied a group of 396 children for the first eighteen months of life and found that wheezing was more common in children whose homes had moisture damage in the kitchen and visible mold in the primary living areas.14 Different findings were published by Dales and colleagues. They studied a group of 357 children for the first two years of life and found no correlation between respiratory illness and mold.15
You need to have top-notch ventilation to remove the humidity and moisture from the air.  The lack of humidity creates a poor breeding ground for bacteria and is the easiest way to maintain your mold-free space.
Experts recommend that if you have toxic black mold in your home then it’s best to move to temporary accommodation until it has been removed, especially if you are suffering toxic symptoms. Ideally you should only return to your home after a professional toxic black mold removal service has completely fixed the problem. There is also a possibility that belongings you take with you when you move can continue to make you sick if they contain mycotoxins from the toxic black mold.
So as we can see from the above, the term Black Mold and its typical association is usually completely misunderstood. If you have visible mold or a suspected mold problem, our advice is always the same regardless of the color of the mold: Get rid of the mold. Whether you decide to personally get rid of the mold or hire a professional like Moldman to do so, be very careful and make sure currently accepted Mold Removal and Mold Remediation Principles and protocol are followed.
I have four 16″ floor fans going pretty much 24/7- 2 in living room area and one each in the 2 bedrooms. I put an 8″ fan on the floor just outside the bathroom door and it runs consistently. No more humidity there now.
I have the same symptoms as you. The burning gets worse when follow the protocol for removing the toxins. I was diagnosed first with Fibromyalgia, then my thyroid went hypo. I got sick so quickly. In hind site…everything got bad when I was under stress. At times I couldn’t walk up and down the stairs. My lips would swell for no apparent reason. The allergist couldn’t find anything wrong.
Although a fever technically is any body temperature above the normal of 98.6 F (37 C), in practice, a person is usually not considered to have a significant fever until the temperature is above 100.4 F (38 C). Fever is part of the body’s own disease-fighting arsenal; rising body temperatures apparently are capable of killing off many disease-producing organisms.
The highly publicized “toxic mold”—meaning the varieties that send mycotoxins into the air, the inhaling of which can acutely sicken anyone—causes most concern right after a flood. In the wake of Hurricane Matthew in South Carolina last year, sludge stood feet deep in homes for days. As it receded, toxic black mold grew. In one small community, Nichols, it was more the mold than the water itself that left the town’s 261 homes uninhabitable for months.
Decongestant nasal sprays. These include oxymetazoline (Afrin, others). Don’t use these medications for more than three or four days, as they can cause congestion to come back with even worse symptoms when you stop using them. Other possible side effects include headache, insomnia and nervousness.
Windshields, stemware and beverage bottles are bound together with concrete and fly ash (a waste by-product of coal-burning power plants) as opposed to a petroleum-based resin binder. The countertops are comparable to granite in terms of strength, scratch resistance, heat resistance and maintenance.
Like the skin test the MELISA test detects allergies by applying allergens to the sample and identifying whether there is a heightened reaction. Also like the skin test the MELISA test does not measure the amount of a mold’s toxins or allergens in a person’s body, only whether the person has an allergic reaction to that mold.
A better method of initially screening a building for mold is the ERMI test. ERMI stands for Environmental Relative Moldiness Index. It utilizes quantitative polymerase chain reaction (MSQPCR) technology to identify mold in dust that has settled in buildings.
I felt like I was going crazy. People are patronizing me. I’ve been living in this house for 2 years now. My roommate actually has Lyme disease so she’s probably affected as well. She was ill too but “got better” I have Sarcoidosis. We did the Petri dish thing last year where you test for mold in different parts of the home and they all came back positive but we already knew there was water damage. There are leaks everywhere. Water stains in the ceilings etc. There was no follow up or repair after the testing. I don’t own the home so I couldn’t do anything about it. I’m on SSI so it’s difficult to find a place an affordable place to move to. What prompted the testing was me smelling this horrible mildew smell and becoming increasingly sensitive to every smell and my body reacting to the presence of it. I was finally able to attribute my hyperosma to the methotrexate and phentermine I was taking but, those meds only enabled me to smell the mildew that is present not imagine that it was there! I can feel tingling sensations on my skin, my eyes, my tongue even. Now certain things I touch burn my skin. It’s like I can feel these invisible allergens present on surfaces and clothing, burning my skin, causing itching inside my ears, shortness of breath. People keep saying I’m crazy because they can’t see, smell or feel them. I CAN and I’m not crazy! I think I have CIRS. I have increasing joint pain with no inflammation. My eyes are growing ridiculously sensitive to light and they feel dry and burn all the time. I get dehydrated. My potassium is all over the place. My brain feels weird. I can’t sleep or focus. I can’t eat or I’m TOO hungry that it just hurts so bad! My stomach just one way or another hurts. It produces way too much acid or mucus or both. I’m just bleh. I’m so tired. I’m afraid they’re going to be right and I am going crazy. I need someone to help me!
One non-toxic cleaning agent for mold removal is “Molderizer” and you can get it in 32oz as well as by the gallon. I believe the 32oz can be found for under $20 and the gallon size for just under $50.
, under bathroom tile & under the sink. i’m glad i haven’t completely moved in nor let her come in yet. i have time to get rid of the mold now before i finish moving in & before she spends 1 night here!
SWIFT SWIVELING: Like Alpine buttercups, a small Asian shrub named the telegraph plant (Codariocalyx motorius) tracks the sun – not with its blooms, but with its leaves. Small leaflets attached to the base of larger leaves constantly swivel to monitor changing levels of sunlight, adjusting the position of the primary leaves as needed. The leaves move so quickly you can see them dance with the naked eye. Wikimedia Commons
The second VCS test is available at VCSTest.com. The raw (unconverted) scores and the contrast sensitivity curve are provided for free, and a $10 donation is requested (but not required) for the upgraded results with detailed analysis and interpretation and a PDF that can be downloaded and shared. VCSTest.com now offers what they call an Online Contrast Sensitivity Test, which addresses one of the primary shortcomings of online VCS testing: the variability in how different computer monitors and displays handle visual contrast. The OCST features full display calibration, which adapts the test images to each user by taking into account both their display size and individual display characteristics/properties, like their video card, video drivers, operating system and display settings, including contrast, brightness, gamma, etc. As far as I know, this is the only FACT-based online VCS test that controls for display calibration.
Mold is a non-scientific term for many types of unwanted fungi found both indoors and outdoors. Active mold growth requires moisture. Actively-growing mold damages the material it lives on, thereby impairing structural integrity. In addition, mold is associated with some untoward health effects in humans, including allergies and infections.
I live in a trailer and have discovered mold in a few places while spring cleaning. One place was under the trim at the bottom of the wall in my son’s room. I had researched how to kill mold and found the vinegar option. I sprayed the wall with vinegar (white distilled) and waited a couple of hours. Then I pulled the trim off that was damaged beyond repair and scrubbed the wall. There is still a yellowish color in some places. In the process I scrubbed the wallpaper and part of the wall off. I think it may be in the carpet as well. I am concerned about it being toxic mold too. I do not have the money for home improvements right now as I can barely pay my basic bills. I am concerned now that I may have disturbed the problem and was wondering what can I do to somewhat safely live with this problem until I can have carpets and possibly floors and walls redone. I have no insurance either. What should I do?
For seven years now, America has been struggling to understand its moral responsibility in Syria. For every urgent argument to intervene against Syrian President Bashar al-Assad to stop the mass killing of civilians, there were ready responses about the risks of causing more destruction than could be averted, or even escalating to a major war with other powers in Syria. In the end, American intervention there has been tailored mostly to a narrow perception of American interests in stopping the threat of terror. But the fundamental questions are still unresolved: What exactly was the moral course of action in Syria? And more urgently, what—if any—is the moral course of action now?
Dr. Keith Berndston, a physician in Park Ridge, Illinois, has written a thorough summary of CIRS that I highly recommend reading. In it, he highlights the following criteria that a patient must meet to be diagnosed with CIRS (4):
Thoroughly shake the spray bottle of mold-mitigating solution, then spray the affected area so it’s well-saturated. (Continue to shake the bottle repeatedly during this process in order to ensure the solution stays well mixed.) Allow the liquid to sit on the mold for 5 to 10 minutes so the antibacterial properties have time to work through the grime. Never scrape dried mold, or else the toxic spores could spread into air and cause negative health effects.
Many patients “don’t look that bad.” But those people are struggling with an illness that causes them to lose their quality of life. These patients don’t know that they have a genetic susceptibility to develop this illness based on their immune response genes (HLA–DR). They don’t know that the inflammation that makes them ill comes from within: it is due to an assault by their own unregulated innate immune system responses. Because of exposure to the interior environment of a water-damaged building (WDB), these patients will have a series of abnormalities in innate immune responses that will not self heal; will not abate in severity [actually increase!] and will continue to cause illness from blood- and tissue- based inflammation as well as alteration of the regulation of fundamental genomic activity. At the core of why one person becomes ill from this exposure and another doesn’t is their gene susceptibility (or predisposition) – what is built into their DNA. Every person’s innate immune system is personal and genetically coded – thus, it works differently for each of us. When the body is faced with a foreign substance, it immediately begins to process that substance – recognize it, determine if it is good or bad, a friend or a foe, and throw it into the antigen presenting machinery that will normally generate an effective antibody response. If the body determines the substance is a foe, it will develop antibodies to bind these substances, called antigens. Normally the next time a non-mold susceptible person walks into a WDB, his antibodies will target the antigen and clear it out fast. That protection from so-called acquired immune responses just doesn’t happen in mold patients.
You need to completely fix any water leaks, enable better ventilation where humidity is high and/or address any HVAC system problems. You can also purchase a dehumidifier for any areas that tend to be too humid. Exhaust fans are in kitchens and bathrooms for good reason. Make sure you use them to get moisture out of these prime mold areas.

black mold from water | cleaning mould off walls

I’ve come to not really believe anything anymore as it’s all about the greenbacks. This mold thing, btw, although real, is also a cash cow. Shoemaker is Mr Chaching and Chris is panting, all along for the dough.
What is a low carb diet, really? When can a low carb diet be beneficial? Should everyone follow a low carb diet? Or, can a low carb diet ruin your health? After reading this eBook, you’ll be able to understand the many factors that play into how a person handles a low carbohydrate diet, and whether or not their health will improve on such a plan.
Are these considered better than the Austin air filter that I frequently hear recommended? Also, have you checked out how AllerAir compares to the others (one w/carbon filter)? Several yrs ago that was the one recommended yo me by an environmental health dr.
The first step toward improved health and safety at home is getting a great mold test to find out just what is in the air you are breathing. This mold test from the Mold Inspection Network is a great option. Learn more about it below.
Avoidance of identified indoor allergens can be very effective in controlling allergy symptoms. If such avoidance is not possible or incomplete, antihistamines are a common treatment for reactions to indoor allergens. These are medications that fight the effects of the histamine released during an allergic reaction by blocking the action of the histamine on the tissue.
The AO does produce a small amount of ozone, but it is below the recommended limit. That said, we have always had a HEPA/carbon filter like the IQAir or a BlueAir with a SmokeStop (carbon) filter added to it in the same room as the AO, and I do recommend that to my patients. http://www.airoasis.com/knowledgebase/ozone-air-quality-purifiers
I have a Bosch front loader…already replaced the seal due to mold…it is worse than ever. I will NEVER buy another Bosch product. I was told to use All detergent as it is not petroleum-based, as opposed to Tide, which is petroleum-based. Regardless, the mold is so invasive!! I have tried everything to no avail…any help would be so appreciated.
This may seem like scientific hair-splitting to an average person who simply wants to live and work in nuisance-free environments. Whether or not scientists agree on the cause of illnesses that might occur in damp places, or even the definition of dampness, there are abundant reasons to keep indoor environments clean and dry. This process begins with determining the source(s) of excess moisture, taking necessary steps to eliminate those sources, getting rid of mold that may already be in place, and keeping the area dry afterwards to minimize the potential for further growth of mold.
Many mold inspectors are not using comprehensive, accurate testing methods. If you call up a local mold inspector and ask him to come assess your property, chances are he will do a visual inspection and take some air samples. Both of these methods can yield useful information, but on their own, they are not enough.
According to the Consumer Product Safety Commission, GFCIs have contributed “significantly” to the reduction of electrocution and severe electric shock incidents since their introduction in the early 1970s. The National Electrical Code requires GFCIs, an inexpensive device, for receptacles with proximity to water: outdoors, bathrooms, garages, kitchens, crawlspaces and unfinished basements, laundry/utility rooms, and pools and spas.
If mold removal were as simple as Kung Fu fighting, then there’s no doubt about it, you would have it nailed. But, unfortunately, cost is a large factor when considering mold remediation and the size of your bill often depends on the extent of the infestation.

What We Do

Typically, standard homeowners policies do not cover water damage caused by “maintenance” problems. These include slower, ongoing problems like continuous water seepage or repeat leaks, ongoing humidity problems, problems related to your landscaping or drainage on the property, or condensation. You should also know that almost all homeowners policies generally exclude flood damage, so if your home develops mold from a flood this is probably not going to be covered.
The grout cleaning was fantastic. I have spend a lot of money and tried different methods to clean the grout in my kitchen and nothing worked After using this method my floor looks like the day we installed it.
Toxic black mold can be expensive to remove and even cause a range of health problems — so testing for black mold is an important first step if you think your home might have a black mold infestation.
We are building a strawbale house in Australia and have had moist air over the winter cause mould to form on some of the loose strands of straw [rice straw]. We have not covered with the clay plaster as yet. I was considering the borax and water solution, cutting back the bale a bit first. Some of the stalks have light grey discoloration about an inch or so up inside the stalk. It is not over all the bale just here and there.
In a review of studies of children from ten countries, aged six to twelve, Antova and colleagues found that mold in the household correlated with a variety of respiratory disorders, including wheezing, coughing at night, and allergic symptoms and hay fever.12
Compared with most organisms, slime molds have been on the planet for a very long time—they first evolved at least 600 million years ago and perhaps as long as one billion years ago. At the time, no organisms had yet evolved brains or even simple nervous systems. Yet slime molds do not blindly ooze from one place to another—they carefully explore their environments, seeking the most efficient routes between resources. They do not accept whatever circumstances they find themselves in, but rather choose conditions most amenable to their survival. They remember, anticipate and decide. By doing so much with so little, slime molds represent a successful and admirable alternative to convoluted brain-based intelligence. You might say that they break the mold.
I would avoid spraying anything on a patch of visible mold. Instead put the cleaning solution (vinegar or other) on a clean towel and then wipe and turn to a clean side repeatedly until no more color transfer. Mold spores, especially when dormant, are naturally coated in an oily substance. When you spray any liquid directly on mold growth you will likely cause two things to happen: spores to become airborne as the oily substance repels the water in your cleaning solution; and a possible release of mycotoxins as the mold colony tries to defend itself from what it perceives as an attack. Also, if you kill but don’t completely remove the mold, you can cause a worse situation than you had to begin with. This is due to the fact that as mold is damaged or dies the cell wall breaks down. This can cause an increased release of mycotoxins from within the mold cells which can cause allergies and illness. This is similar to the die off effect that people describe when they are treating internal fungal conditions like Candida overgrowth in the bowel. They will feel worse shortly after the fungi start to die because toxins are being released in larger quantities from the damaged mold cells.
Cheapo supermarket vinegar here in UK is brown and sticky,but a mate orders gallon plastic containers(careful,I`ve found vinegar will eat through some plastics), of white vinegar to use as a weed killer along with salt and Ecover washing up liquid.I will purchase some of that vinegar,I believe it`s from a company that serves the Chinese restaurant chains?
Español: eliminar el moho negro, Italiano: Eliminare la Muffa Nera, Português: Matar Mofo Preto, Deutsch: Schwarzen Schimmel bekämpfen, Русский: уничтожить черную плесень, Français: éliminer la moisissure noire, 中文: 消灭黑霉, Nederlands: Zwarte schimmel doden, हिन्दी: ब्लैक मोल्ड (Black Mold) को हटायें, العربية: القضاء على العفن الأسود, Tiếng Việt: Tiêu diệt nấm mốc đen, ไทย: กำจัดราดำ, 한국어: 검은 곰팡이 없애는 방법
My mold problem is in the ceiling, caused by a leak in the roof, which has been fixed. Are these solutions mentioned for inside the house safe, effective, and legal for this kind of problem and what precautions should be used?
How Do I Get Rid of Mold? It is impossible to get rid of all mold and mold spores indoors. Mold spores will not grow if moisture is not present. Indoor mold growth can and should be prevented or controlled by controlling moisture indoors.
I too am sick from mold in my previous rental home. I didn’t know the mold was there until I moved our storage out of a big walk in closet. I don’t know what kind of mold it was because the landlord went in and bleached the wall as soon as I got our things out and someone else moved right in. I have been sick for 7 months and can’t find any doctors in WY or Montana that have a clue how to even test me for it. I am trying a starvation diet that I found online. I just am at wits end trying to find help and also going broke.
If your house tests above EPA standards, a remediation professional can retrofit an exhaust vent from a suction pit underneath the foundation slab to the outside of the house. Costs range from $800 to $2,500. For more information, contact the EPA’s radon hot line at 800-55RADON (557-2366).
Borax is a popular chemical used in many household products such as fungicides, herbicides and as a household cleaner. It deodorizes, cleans and disinfects – making it a really good choice to help fight off and kill black mold.
For people sensitive to mold, inhaling or touching mold spores can cause allergic reactions, including sneezing, runny nose, red eyes, and skin rash. People with serious mold allergies may have more severe reactions, including shortness of breath. In people with asthma who are allergic to mold, breathing in spores can also cause asthma attacks.
Too many preventable accidents have happened when combining 2 or more cleaning agents together. Often enough, this occurred because the user (although well intentioned) did so to create a stronger cleaning agent for the job at hand.
Moisture and Mold Prevention and Control Tips When water leaks or spills occur indoors — ACT QUICKLY. If wet or damp materials or areas are dried 24-48 hours after a leak or spill happens, in most cases mold will not grow. Clean and repair roof gutters regularly. Make sure the ground slopes away from the building foundation, so that water does not enter or collect around the foundation. Keep air conditioning drip pans clean and the drain lines unobstructed and flowing properly. Keep indoor humidity below 60 percent (ideally between 30 and 50 percent). If you see condensation or moisture collecting on windows, walls or pipes ACT QUICKLY to dry the wet surface and reduce the moisture/water source. Condensation can be a sign of high humidity. Learn more about actions that will help to actions to reduce humidity and help prevent condensation. Learn More about Mold and Moisture Prevention and Control

mold in your house health effects | how to get rid of black mold on drywall

Toxic black mold mycotoxins that are in the air can enter a person’s eyes. The mycotoxins are cytotoxic (toxic to cells) and when they come into contact with eye cells they cause inflamed and injured eyes and create vision problems.
Bosch is terrible for mold on the seal. I have had seal replaced and it is impossible to keep mould free! Never ever again will I buy a Bosch. The company ignores to problem, but it is clearly a design fault.
I took a drop ceiling out of an old house and found dry mold on the rough lumber. I sprayed it down with vinegar 2-3 times. Removing it was impossible. I painted over it with a mold killing primer, but still difficult to cover completely. Also I was exposed initially, I’m using a dehumidifier, and staying out of the area for the moment.
Consider replacing absorbent materials. Removing mold from absorbent materials can be extremely difficult. Instead, most professionals will recommend that you remove and replace such items, since it probably won’t be possible to remove the mold without damaging the material or causing further problems.
Hi Chirs, Thanks for this great article. I’m wondering if you’ve heard back from Dr. Ghosh about your questions regarding AO? I want to buy one, but I work from home and have 2 cats here as well. It would be hard to run it while not in the room since we have an open studio, and if we run it only when we’re out the cats would still be exposed. Dr. Shoemaker highly recommend I get one, but I’m still a bit concerned about the cats based on your comments about only running them while you’re not in the room. Do you run the AO around your pets (if you have pets?) Thanks!
Robbie, there currently is no Dr.’s in Louisville that can competently treat for mold toxicity. I had to go to Chicago to see one. After the first visit, they can do appointments over the phone. However, lately there may be a few Dr.’s that are closer, that may possibly treat mold toxicity/CIRS. Send me your contact info and I can send their names/numbers to you. None of them likely take insurance, it’s usually an out of pocket expense.
Working on 1970 camper and foam seating/ bed appear to have mold . Presently washing covering borax but what about foam . I intend to recover in vinial later. What to do now will anything penitents 5 inch thick foam thanks
After mold is physically removed from its source, the air should be cleaned of airborne mold spores using HEPA (High Efficiency Particulate Air) air scrubbers and air exchange (i.e. replacing dirty moldy air with clean fresh air through simple ventilation or more sophisticated negative air controls for bigger jobs)
Hi – sorry you’re having to deal with this. I recently moved out of the house that made me sick, and took all my possessions with me because … well, because it didn’t occur to me not to. Then I did my research after the fact. I think there are several important, individual factors that affect the decision about what to keep or throw away.
3. Individuals who have been harmed by toxic mold often develop sensitivities to other toxic substances (perhaps in at least in part due to the perforations caused to the blood-brain barrier by trichothecenes).
The flooding of Houston is a health catastrophe unfolding publicly in slow motion. Much of the country is watching as 50 inches of water rise around the chairs of residents in nursing homes and submerge semitrucks. Some 20 trillion gallons of water are pouring onto the urban plain, where developers have paved over the wetlands that would drain the water.
In small amounts, mold spores are usually harmless, but when they land on a damp spot in your home, they can start to grow. When mold is growing on a surface, spores can be released into the air where they can be easily inhaled. If you’re sensitive to mold and inhale a large number of spores, you could experience health problems.
This would apply to small black mold killing projects only – larger jobs may require that negative pressure is put in place to keep mold spores from becoming aerosolized in your home (more on this later).
Are common additives to food and supplements like soy lecithin, carrageenan, xanthum gum, and magnesium stearate harmful–or harmless? Read this eBook to find out which ingredients you should be concerned about, and which are safe.
It’s worth noting that no single test—including ERMI—is reliable as a means of assessing whether biotoxins are present in a building. There is no substitute for an experienced mold inspector that is using evidence-based methodology. (I just wish they were easier to find!)
No need to take a wrecking ball to the entire house at the sight of a little mold. Focus your mold removal and mold remediation efforts on the area where the water and mold growth is occurring by removing the mold at its source (e.g. on the drywall) and eliminating the water source.
Your report of restoring books by storing them for several months in baking soda and/or activated charcoal is very interesting . I read elsewhere that charcoal filters in an air purifier can remove mold mycotoxins . If books can be restored in that way , then perhaps clothes and shoes with no visible mould could also be restored . Are you referring to stachy , black aspergillus mold mycotoxins , or less harmful ones ? Were your books exposed to stachy ? Where did you dreive your info from about this method ? I have a black mould problem in a 1 1/2 mete area of one wall , not in the bedroom , but as I am on a pension , with few assets , and neither my clothes nor my shoes smell of mold , and I realise I will need to ditch my mattress , bed , furnishings , cushions , washing machine , portable air conditioner , two air purifiers , and blender , juicer , stereo , computer , radio , etc., I am loathe to also ditch all my apparel and bags , bedding , blankets , etc . I am aware of the washing protocol of washing 3 times with borax, vinegar and epsom salts, each separately , and the storage solution would be an extra remedial measure . Any info would be appreciated , also any ways that the machines with motors could possibly be saved .
The more a person is around mold the more sensitive to it they will become. This means that they can end up unable to tolerate being around even small amounts of mold. Their allergic reactions will also become more and more severe.
Mold is one of the worst enemies your home can have. Once growth begins, it can spread and grow in your home or even yourself. Its growth can also cause deterioration in the structural integrity of your home through fungal growth and rot.
First, find and eliminate the source of moisture. Then, verify it is truly black mold, which requires moisture to live. Moisture ruins particle board causing it to swell and delaminate. If the surface is sound, it is probably not black mold. If it is black mold, to see it you have already removed the linoleum, so replace the particle board and know the the job is done – black mold is very pervasive, and particle board is inexpensive.
I was diagnosed with fybromyalgia about 15 years ago. I know on several occasions I was exposed to black mold. I’ve a lot so been reading some on the fact that some have been misdiagnosed with fybro, when it was black mold desease. I have asked my family Dr group 4 times to be tested, reading that the symptoms are extremely similar. They insist that as long as I am no longer exposed, there is no need to test. True?
Biotoxic illness refers to the cause of a person’s illness. All biotoxic illnesses have one common denominator…toxins produced by living things.  The tests contained in this panel look at the complex cascade of events throughout multiple inflammatory pathways produced by biotoxic mold exposure
Molds are a large and taxonomically diverse number of fungal species in which the growth of hyphae results in discoloration and a fuzzy appearance, especially on food.[3] The network of these tubular branching hyphae, called a mycelium, is considered a single organism. The hyphae are generally transparent, so the mycelium appears like very fine, fluffy white threads over the surface. Cross-walls (septa) may delimit connected compartments along the hyphae, each containing one or multiple, genetically identical nuclei. The dusty texture of many molds is caused by profuse production of asexual spores (conidia) formed by differentiation at the ends of hyphae. The mode of formation and shape of these spores is traditionally used to classify molds.[4] Many of these spores are colored, making the fungus much more obvious to the human eye at this stage in its life-cycle.
Alexander Fleming’s accidental discovery of the antibiotic penicillin involved a Penicillium mold called Penicillium notatum (although the species identity is disputed as possibly being Penicillium chrysogenum or Penicillium rubens).[13] Fleming continued to investigate Penicillin, showing that it could inhibit various types of bacteria found in infections and other ailments, but he was unable to produce the compound in large enough amounts necessary for production of a medicine.[14] His work was expanded by a team at Oxford University; Clutterbuck, Lovell, and Raistrick, who began to work on the problem in 1931. This team was also unable to produce the pure compound in any large amount, and found that the purification process diminished its effectiveness and negated the anti-bacterial properties it had.[14]
Thanks for the article, I will definitley try out some of these things to get rid of the mold in my house. For several months I just had a slight cough, I didn’t think much of it at first, but when it didn’t stop I went to the doctor. After a while of taking medicine with no results, I decided to look for other causations, turns out there is mold behind my walls.
Fungi reproduce by means of spores which are spread through the air but land and survive on surfaces. Many spores can remain dormant for long periods under dry conditions, but typically develop into fungi in the presence of moisture.
Black mold can cause an array of allergic reactions and health problems. In most cases, depending on the length of exposure and the number of spores inhaled, symptoms can include chronic fatigue or headaches, fever, irritation to the eyes, mucous membranes of the mouth, nose and throat, sneezing, rashes, and chronic coughing. In cases of prolonged or severe exposure, or cases exacerbated by an allergic reaction, more extreme symptoms can present, including nausea, vomiting, and bleeding in the lungs and nose
The AO does produce a small amount of ozone, but it is below the recommended limit. That said, we have always had a HEPA/carbon filter like the IQAir or a BlueAir with a SmokeStop (carbon) filter added to it in the same room as the AO, and I do recommend that to my patients. http://www.airoasis.com/knowledgebase/ozone-air-quality-purifiers
Many times, in the past, I have just made a diagnosis of toxic mold syndrome based on a patient’s symptoms and demonstration of toxic mold in the patient’s environment. And I still do this clinical diagnosis quite a bit, mostly due to the costliness of diagnostic testing.
If the wood you’re dealing with is either painted or stained, that means the mold has not penetrated. You can therefore stick to a mild cleaning solution—a simple mixture of dishwashing detergent and warm water. Dip a soft-bristled scrub brush into the soapy water you’ve prepared, then gently go over the moldy area. If you get unsatisfactory results, opt for vinegar, an effective mold killer. With a spray bottle filled with vinegar, spritz the mold and then let the vinegar sit for an hour to work its magic. Once enough time has elapsed, proceed to wipe down the wood with a clean, damp towel. Inspect the wood for any remaining mold, and if you don’t see any, wipe the wood down with a rag.
Submerging a city means introducing a new ecosystem of fungal growth that will change the health of the population in ways we are only beginning to understand. The same infrastructure and geography that have kept this water from dissipating created a uniquely prolonged period for fungal overgrowth to take hold, which can mean health effects that will bear out over years and lifetimes.
This tests for mycotoxins in the urine that the body excretes into the urine. The drawbacks of this test are that it is expensive although the price has come down and it is not fully covered by insurance. Also you should be on a detox program for the results to be accurate. Patients may order this test for themselves.There are two labs now that offer this test. SEE THE DIAGNOSIS PAGE FOR DETAILS. 
If you suspect a problem (or better yet, as preventive maintenance), hire professionals to inspect for damaged shingles and siding, poorly connected plumbing and leaky pipes, and other moisture problems, such as inadequate vapor barriers. Mitigate the issues as soon as possible.
The smell of the fungi in her house got so strong after the flooding that it gave her headaches and made her nauseated. As she evacuated, wearing a mask and gloves, she took samples of the mold along with her valued possessions. Her lab at Rutgers went on to report that the volatile organic compounds emitted by the mold, known as mushroom alcohol, had some bizarre effects on fruit flies. For one, they affected genes involved in handling and transporting dopamine in a way that mimicked the pathology of Parkinson’s disease in humans.
Today we have a collection of images of interesting and unique houses from around the world, from cave dwellings and tree houses to soccer-ball-shaped shelters, toilet-shaped homes, and portable domiciles. Updated with new images on October 3, 2017.
Jump up ^ Empting, L. D. (2009). “Neurologic and neuropsychiatric syndrome features of mold and mycotoxin exposure”. Toxicology and Industrial Health. 25 (9–10): 577–81. doi:10.1177/0748233709348393. PMID 19854819.
3. Consider where your mold problem was, and which possessions were affected. If mold was throughout your house, or in your duct work, then likely everything in your house could have been exposed. In my house, the problem was in a sun room and two AC units on the first floor. But the spaces and possessions on the second floor did not seem to be affected.
I had a patient come back with a positive stachybotrys IgA level. My patient was greatly relieved to have these results as they helped her grasp that mold toxicity was the cause of her symptoms. It also helped her with her relationship, as her condition being caused by toxic mold, now had more credibility in her boyfriend’s eyes.
In particularly severe cases of prolonged exposure, black mold health effects can be more dangerous. Often compounded by allergic reaction to the black mold spores, these symptoms can include nausea, vomiting, and bleeding in the lungs and nose.
Chris, your podcast and several others have added so much value to my life and are helping me overcome chronic illness. I became aware of Dr. Shoemaker’s work in April 2015 when it suddenly hit me after listening to Dave Asprey’s podcast and being indoors on a rainy day that the illness I was suffering from was mold. (Maybe Lyme too.) I requested several tests from my doctor. I failed an online VCS test. I was hitting potholes because I couldn’t see them. I am realizing many people labeled with mental illness are suffering from mold-related sickness too. I was suicidal. It started with what I believe was exposure to Stachybotris. Mary Ackerley, integrative psychiatrist has a great article about it. http://www.survivingmold.com/community/mary-ackerley-the-brain-on-fire-the-role-of-toxic-mold-in-triggering-psychiatric-symptoms I am beginning recovery. Also I realized that connection between mycotoxins, glutamine and histamines. Stopping high histamine foods is also helping. You contribute so much to the community and are helping me tremendously. Bravo!
Wear a respirator or a facemask rated for black mold spore protection, and cover arms, legs and hands to avoid contact with mold spores. Use soap and a sponge to remove visible mold. If the moldy area is dry, lightly spray with water, as this will reduce the incidence of airborne mold spores during cleaning. Next, use commercial black mold removal products, which can be found in most hardware or home repair stores, to disinfect the moldy areas, in addition to any adjacent areas. If you use bleach, make sure it won’t discolor the material or surface. Place all sponges, equipment and other materials used in cleaning in a heavy duty garbage bag, and if possible, remove the bag through an nearby exit as opposed to the main house, to avoid distributing mold spores.
I called Labcorp and was told that “HLA DR 1345 DQ Intermediate” in the lavender tube is $600. Is that the right test? I haven’t been able to figure that out on survivingmold.com, and haven’t found anything about the circumstances under which my doctor can code the test so it will be covered by insurance.

What We Do

Mike was really responsive. He came out right away, gave me an estimate soon after, then came out and did the job the next day once I gave him approval. He did a great job too. I’ve already recommended him to other real estate agents that I work with and passed out his business cards to many people.
Cutting-edge, while more expensive mold remediation methods may include, using ice pellets or sand and walnut shells to blast mold away from your basement walls and removing mold in your attic from the wood sheathing and overhead beams.
Important update: Amazon.com is not an authorized reseller of IQAir, so if you purchase from there the warranty won’t be valid. I talked with someone at IQAir who said they are constantly battling to get the IQAir removed from Amazon, but it’s a difficult challenge. I updated the link in the article to go directly to IQAir’s list of authorized internet resellers.
Use soap and a sponge to clean away visible mold. If the moldy area is dry, lightly mist enough water to dampen the area. Dry mold becomes airborne very easily and dampening the mold lessens the possibility of spores drifting.
Instead, you should talk to a toxic black mold removal service as soon as possible, as it is extremely risky to try to kill or remove toxic black mold yourself. Mold that is toxic should really only be removed by a professional mold removal service experienced in removing toxic black mold. The correct methods of toxic black mold removal are needed to contain the spread of spores and mycotoxins during the remediation process.

how to determine black mold | basement mold removal

I believe that a birth defect that was caused by exposure to mold could have been the result of old technology under the toilet and the pregnant woman would be exposed to it every day of her pregnancy. Every home has them and up till now what is out of sight is out of mind. I am sure there are cases where the moms did not know how they were exposed. I believe I have found the answer.
According to the Chimney Safety Institute of America, the chimneys and connector pipes that serve oil and gas furnaces are subject to weathering, animal invasions, deterioration/rust-out and the accumulation of nest materials and debris. As a safeguard, have fuel-burning furnaces, stoves and fireplaces — as well as their connections and exhaust vents — inspected and serviced before each heating season. And never idle your car in the garage.
Clean the entire area with a disinfectant to kill the remaining mold spores. Clean areas that had visible mold, along with all other areas. Mold spores are very small and may not be seen but can remain on surfaces for months or years. Disinfectants for use on mold can be found in hardware stores. You may use bleach, but be make sure it won’t discolor the material or surface.
White Distilled Vinegar – An excellent mould-killer, diluted vinegar can be worked directly into the stain – or you can pre-soak the clothing in a bucket of water mixed with one cup of vinegar. You can also add 1-2 cups of vinegar to your washing machine per cycle to kill any mildew odours and brighten your whites.

What We Do

If you can afford to built your own home, build with hemp crete or jet board. It does not get mold, or pests and takes much longer to burn if a fire breaks out. Magnacrete, another board, does not burn at all. It costs about $7 more a board than the formaldehyde toxic board but why make a home 10 times more toxic than the air outside by using such poisonous wood to make your home with? Also check with what the dry wall is made with. Some is made from the toxic waste of fertilizer production waste! Scary.
Very useful! I tend to have bad reactions from toxic chemical cleaners. A lot of times the smell sets off a migraine. When I had black mold in my bathroom I was desperate for an alternative and found out about vinegar – and later tea tree oil. Oh, I wish I had found your hub sooner, but I swear by these products and my house is never without them. Thank you for sharing. 🙂
Whether it’s the slimy black spots on your shower curtain, the fuzzy white patches on your basement floor, or the slick orange film that forms on your kitchen drain, household mold is more than unsightly. In some cases, mold in your home can make you sick, especially if you have allergies or asthma.
The first step toward improved health and safety at home is getting a great mold test to find out just what is in the air you are breathing. This mold test from the Mold Inspection Network is a great option. Learn more about it below.
Steve, you are not crazy..its all real what’s happening to all of you. I had a minor area of damage July 25, 2012 and became sick with asthma in 2days then within 2 wks it was crushing, burning pressure in my bladder with frequent urination and extreme thirst. Then anxiety and then 8mths later in March i overnight became severely depressed out of the blue. Then mood swings and rage issues and all the other problems continued. Then anorexia which i still have every so often where i cant eat for a wk at a time bc i feel so bloated and full…it passes and comes back again. Then blurry vision and the eye dr said i should be seeing ok but i couldnt and still cant. My cats started losing their hair a bit and 2 of them became asthmatic and they all (11) started throwing up thier food at every meal all around the house and still do. I had surgeries on my bladder that I didn’t need bc it has turned out to be IC which is interstitial cystitis which is what was and does if i eat the wrong thing what causes my bladder pain WHICH I HEALED MY SELF bc the drs are uninformed and were urging me crazy with over active bladder meds which did not work at all…none of them. Then they all were saying i needed anti depressants bc if they cant find the cause then of course it must be in your head…right? No! Thats not it at all. I was finally diagnosed this past Feb when i ended up in a recently rained dr in the Shoemaker protocol as in Dr Shoemaker and his website is called “surviving mold.com” and it has a lot of info which is very helpful. Many Drs and others do not believe that we are sick with this life changing illness but we all are and you need to know its a up hill battle you and all of us have to fight to get well and to be believed. There ar some very good books that i found very helpful to explain all of this. I was told in Feb by my dr to move out ASAP and to leave everything behind. If i take anything ill just contaminate the new place so ive been trying to get the money together to do that….but its very hard while you’re suffering and fighting the none believers and have no energy to do it..or anything some days. I had i one of my cats urine tested for the mycotoxins and it came back for gliotoxins which are shed by yeast. I lost 3 cats to cancer since the pipe burst and the company sent out allowed the mold to grow trying to cut corners and now im losing everything and no one will take responsibility for it which is maddening and completely wrong but its the way it is. I hope you get some answers but please do not give up..there is hope and there are people to help guide and give advice but it takes time. YOU ARE NOT IMAGINING IT, IT IS REAL!
Toxic black mold is a greenish-black gelatinous mold. It is usually slimy because of a wet layer on the top. However if a toxic black mold colony’s water source runs out it can appear dry and powdery.
Thank you Chris for all your great articles! I just have one question: Under bioxin’s found in water damaged buildings you mentioned Beta-glucan. My understanding of beta glucan is found in mushrooms which works as a immune modulator and is suppose to be good for our health. Does this mean anyone suffering from toxic mold issues should not consume mushrooms and/or mushroom supplements?
In any case, a medical diagnosis is needed. For example, does the person have an allergy, asthma, or an infection? There are established methods for diagnosing these and many other conditions. Diagnosis is related to the disease process, not a specific trigger. For example, it is possible to test people for allergies to molds, but positive results do not necessarily correlate with symptoms. A sizeable percentage of the U.S. population will test positive for mold allergens but have no symptoms; estimates range from 3 percent to more than 90 percent.9 And, generally speaking, treatments will not differ if the cause is mold exposure versus other triggering conditions.
My mold problem is in the ceiling, caused by a leak in the roof, which has been fixed. Are these solutions mentioned for inside the house safe, effective, and legal for this kind of problem and what precautions should be used?
You should also take commonsense precautions when it comes to electricity. All electrical outlets and switches should be covered by faceplates. Use the right light bulbs in all lamps and lights. Check the wattage requirements by looking inside the fixture.
I soaked some lengths of toilet tissue with bleach and tucked it around the door seal and left it for 24 hours. I removed the tissue and filled the liquid soap tray with bleach and put three dishwasher tablets in the powder tray and put it on the hottest wash cycle. Not a perfect result, but a lot better than it was before.
Many foam type products do not age well and they are porous so mold will be difficult to get rid of (if not impossible) when the mold or mildew gets deep into the cells or fibers of the cushion material.
POWER PLANT: If you look closely at the inner pink lobes of the Venus flytrap’s (Dionaea muscipula) trap, you will see several hairs. The trap shuts when an insect touches two or more of these hairs – or the same hair more than once – within a 30-second window. Tripping the hairs triggers an electrical impulse that propagates through the carnivorous plant’s modified leaves, opening pores in cells walls so that water rushes in and snaps the trap shut. Scientists can also force the trap to close by applying an electric current to its lobes. Tristan Gillingwater, Wikimedia Commons
Mold is everywhere. It’s a type of fungus that grows from tiny spores that float in the air. It can grow almost anywhere that spores land and find moisture and a comfortable temperature, between 40 and 100 degrees F. Typically that includes about every damp place in your home.
I just want to know if anyone has cats that can tell there is mold in their carpets? My cats refuse to walk on our carpets much less lie on them. They jump from chair to chair and couch to couch. The only floor they will walk on is the kitchen and bathroom floors. I believe we have gotten mold from the downstairs getting flooded when we had a bad storm last spring. I found black spots in the carpet even when nothing was spilled on it. Any help would be appreciated.
Clorox clean-up – is made up of mostly bleach. Bleach does not kill the mold. This is a myth. What bleach does is to literally bleach the color of the mold, making it hard to see after the mold has been sprayed and it dries. Unfortunately the mold is still there. That’s why you may notice the mold comes right back in most cases in the same exact place. Again, bleach is not effect on mold.
This would include carpet, dry-wall, drop-down ceiling tiles and wood paneling. When these items get wet and remain in this condition for any period of time, then the moisture weakened areas are primed for mold growth.
What do memory loss, depression, anxiety, fatigue, nerve pain, and infertility have in common? They can all be caused by B12 deficiency. Find out why B12 deficiency is more common than most doctors think, how to know if you’re deficient, and what to do about it.
If you believe you or someone you love is becoming ill from mold exposure, see a doctor. Remember that agencies like the CDC cannot treat health problems and only a local health care provider can provide the care you or your family needs. The CDC recommends that you first consult your family doctor or PCP and ask whether you need to see a specialist like an allergist, an infectious disease doctor, or a pulmonary physician. Remember, if your health problem is an emergency, get help immediately.
You can find both of these Eco-friendly mold cleaners at just about any major hardware store. There are a handful of grocery chain outlets out there (hopefully near you) as well that carry the “Concrobium” Product line.

can you get sick from black mold | borax for mold

As alarming as these numbers are, they don’t tell the whole story. Although water damage is probably the biggest concern, mold and other biotoxins can also develop in buildings that are not water-damaged but have indoor humidity levels above 50 to 60 percent. In fact, many experts recommend maintaining indoor humidity levels between 30 and 50 percent for preventing the growth of mold and other biotoxins.
Moldman was the best mold company I talked to. They explained everything, and were very honest and informative. I would use them again if I ever had another mold issue. I have also already recommended this company to friends. Everyone I spoke to was very nice.
Moisture and Mold Prevention and Control Tips When water leaks or spills occur indoors — ACT QUICKLY. If wet or damp materials or areas are dried 24-48 hours after a leak or spill happens, in most cases mold will not grow. Clean and repair roof gutters regularly. Make sure the ground slopes away from the building foundation, so that water does not enter or collect around the foundation. Keep air conditioning drip pans clean and the drain lines unobstructed and flowing properly. Keep indoor humidity below 60 percent (ideally between 30 and 50 percent). If you see condensation or moisture collecting on windows, walls or pipes ACT QUICKLY to dry the wet surface and reduce the moisture/water source. Condensation can be a sign of high humidity. Learn more about actions that will help to actions to reduce humidity and help prevent condensation. Learn More about Mold and Moisture Prevention and Control
3. Individuals who have been harmed by toxic mold often develop sensitivities to other toxic substances (perhaps in at least in part due to the perforations caused to the blood-brain barrier by trichothecenes).
Keep indoor humidity between 30 and 50 percent. Relative humidity can be measured with a moisture or humidity meter, a small, inexpensive ($10 to $50) instrument available at many hardware stores. Venting bathrooms, dryers, and other moisture-generating sources to the outside; using air conditioners and de-humidifiers; increasing ventilation; and using exhaust fans when cooking, dishwashing, and cleaning can all help to reduce indoor humidity.
Typically, standard homeowners policies do not cover water damage caused by “maintenance” problems. These include slower, ongoing problems like continuous water seepage or repeat leaks, ongoing humidity problems, problems related to your landscaping or drainage on the property, or condensation. You should also know that almost all homeowners policies generally exclude flood damage, so if your home develops mold from a flood this is probably not going to be covered.
There are many steps to reduce exposure. For example, replace vinyl wallcoverings with Cradle-to-Cradle-certified ones made with new polymers and water-based inks and coatings. If dry-cleaned goods have a strong chemical odor, which indicates a high concentration of the solvent PERC (perchloroethylene), do not accept them until they have been properly dried. Use non- or low-VOC paints, glues, epoxies, adhesives and building products. Even when using low-VOC products, ventilate the space with plenty of fresh air. Dispose of even small amounts you won’t use right away in an environmentally responsible way.
It’s impossible to get rid of all mold and mold spores in your home, but because mold spores can’t grow without moisture, reducing moisture in your home is the best way to prevent or eliminate mold growth. If there is already mold growing in your home, it’s important to clean up the mold and fix the problem causing dampness. If you clean up the mold but don’t fix the problem, the mold will most likely return.
Radon is a naturally occurring radioactive gas, which cannot be seen, smelled or tasted but is found in the dirt and rocks beneath houses, in well water and in some building materials. When you breathe radon, the sensitive cells in your airway get irritated, increasing the risk of lung cancer. Radon causes an estimated 20,000 lung cancer deaths each year, but it can take up to 20 years of exposure before one falls ill.
If the moldy area is less than about 10 square feet (less than roughly a 3 ft. by 3 ft. patch), in most cases, you can handle the job yourself following EPA’s mold guidelines. If you have health concerns, consult a health professional before starting cleanup.
Another set of experiments suggests that slime molds navigate time as well as space, using a rudimentary internal clock to anticipate and prepare for future changes in their environments. Tetsu Saigusa of Hokkaido University and his colleagues—including Nakagaki—placed a polycephalum in a kind of groove in an agar plate stored in a warm and moist environment (slime molds thrive in high humidity). The slime mold crawled along the groove. Every 30 minutes, however, the scientists suddenly dropped the temperature and decreased the humidity, subjecting the polycephalum to unfavorably dry conditions. The slime mold instinctively began to crawl more slowly, saving its energy. After a few trials, Saigusa and his colleagues stopped changing the slime mold’s environment, but every 30 minutes the amoeba’s pace slowed anyway. Eventually it stopped slowing down spontaneously. Slime molds did the same thing at intervals of 60 and 90 minutes, although, on average, only about half of the slime molds tested showed spontaneous slowing in the absence of an environmental change.
Chlorine bleach is a strong toxic compound that emits very strong fumes. Therefore, always take caution when mixing the solution. In order to create this, you’ll need to mix a cup of bleach in one gallon of water. Make sure to wear rubber gloves during the mixing process to avoid contact with the skin. Add a little detergent to make the solution more effective and mix very well. Place some of it in a plastic spray bottle to apply.
Toxic black mold mycotoxins can be breathed in, ingested, or absorbed through a person’s skin or eyes. Eventually the mycotoxins then find their way into the person’s blood. This leads to heart damage, problems with blood clotting and internal or external hemorrhaging.
Identify black mold. Black mold often grows in damp areas, places that are often wet, or places where there has been a leak or water damage. Common places to find black mold include basements, crawl spaces, bathrooms, and laundry rooms. Here are a few of the identifying characteristics of black mold:[1]
Hi – sorry you’re having to deal with this. I recently moved out of the house that made me sick, and took all my possessions with me because … well, because it didn’t occur to me not to. Then I did my research after the fact. I think there are several important, individual factors that affect the decision about what to keep or throw away.
@barleysinger. if you are going to talk about birth defects at least spiel it correctly. people afflicted by spina bifida don’t take too kindly to hocus pocus people saying unproven things of how one can have a baby born with it. It isn’t the water because less children now are born with it than before they added things to the water and most cases were in rural areas. It is one thing to try to help people and you know what you are talking about. It is another to hijack.someone else’s blog with your own inaccurate facts about a totally different subject.
Mold is a non-scientific term for many types of fungi – unwanted, unappealing patches of black, brown, yellow, pink, green, smelly, fuzzy growths. Countless species of mold are found both indoors and outdoors.
Twelve years ago in New Orleans, Katrina similarly rendered most homes unlivable, and it created a breeding ground for mosquitoes and the diseases they carry, and caused a shortage of potable water and food. But long after these threats to human health were addressed, the mold exposure, in low-income neighborhoods in particular, continued.
“Toxic mold syndrome” is a legal construct, rather than a medical diagnosis, involving unidentified disease processes, a constellation of disparate symptoms, and reports of illness uncorroborated by a physical examination of the patients or a professional examination of their surroundings. Although “black mold” or “toxic mold” has been identified in litigation as a cause of human illness, there is no established cluster of symptoms or physical findings associated with this alleged disease. There are neither diagnostic criteria nor any valid scientific publications establishing Stachybotrys or other molds as a cause of these diverse symptoms.Footnote 2;Reference 1
Stachybotrys is usually greenish-black and somewhat slimy or wet, but may also appear grayish with a sooty, powdery texture. Additionally, other molds may look similar. That’s why it is impossible to tell if any given mold is black mold by looks, smell or even location. The only way to determine a mold species is examination under a microscope. Testing is costly, advises the CDC, and isn’t really necessary. Any mold can cause health problems, as they point out. Therefore, you should arrange to have any mold in your home removed, no matter what type it is.
The truth is that all molds; whether black, green, pink, orange or red can potentially cause cold or hay fever symptoms in healthy people and can aggravate symptoms in those with compromised immune systems, or people with breathing issues.
If the moisture damage has been neglected or gone unnoticed for long, you’re likely to find rot. Where possible, remove and replace soft, spongy studs and wall sheathing. Where removal is difficult, treat the affected areas with a wood preservative (available at home centers), after cleaning the wood and allowing it to dry. Then double up rotted members with pressure-treated wood.
Scientific American is part of Springer Nature, which owns or has commercial relations with thousands of scientific publications (many of them can be found at www.springernature.com/us). Scientific American maintains a strict policy of editorial independence in reporting developments in science to our readers.

What We Do

CDC’s Mold Web site provides information on mold and health, an inventory of state indoor air quality programs, advice on assessment, cleanup efforts, and prevention of mold growth, and links to resources.
I am a family practice physician and I have been in practice for over 15  years. In 2006 I was sick with many terrible symptoms for 11 months. I did not know why I was sick until I discovered I was being exposed to very high levels of stachybotrys, the more common toxic black mold and chaetomium, a less common toxic white mold. This was what caused all my symptoms over the span of a nine month exposure. 
You can’t see, taste or smell carbon monoxide (CO), a toxic gas produced by incomplete combustion of fuel-burning devices, and people often dismiss the symptoms of CO poisoning (headache, nausea, dizziness and confusion), which can be fatal. This “silent killer” accounts for an estimated 15,000 emergency room visits and 500 deaths a year.
Also Chaetonium was found The Asper/Pen was 27 times higher in livingroom where I sit than outdoor sample & bedroom was 14 (?) times higher…HERTSMI Mold Test will this stand up in court? Thank you for all your helpful info Chris!
You have to open up the wall to get at the mold growing inside. Since you have to repair the wall anyway, don’t hesitate to cut the drywall back beyond the obvious damage to find all the mold and let the wall dry out. To avoid cutting electrical wires, poke a hole through the damaged section and locate the wires first. Turn off the power to the outlets before you cut. Mist the moldy drywall and insulation with the pump sprayer to avoid spreading mold spores. Double-bag moldy material in heavy-duty plastic bags and tie them shut.
I also live in the SF Bay Area and have been searching for a knowledgable specialist to come check out my new apartment (just recently had to move as ERMI score was too high). Can you please share who you found in this area?
The extent of black mold symptoms depends upon the number of spores inhaled and the duration of exposure. Black mold easily causes mold allergy symptoms, and symptoms likely persist until you get rid of the the black mold. Sometimes people don’t realize the health problems they’re having are actually black mold symptoms. Black mold is not something to ignore because it only gets worse the longer you ignore it.
I’ve always wanted to say thanks to internet and many thanks to all those who for heartful reasons take their time and share their knowledge to help others with everyday complications – Mellisa, you’re one of those who would save the dayCn
Since many types of mold can produce allergens and irritants, you should contact a qualified mold remediation company regardless of the color or type of mold. In many instances, multiple types of mold can exist in the same house or structure. If you suspect that you have a mold problem, contact a SERVPRO Franchise Professional immediately. Click here to find a SERVPRO Franchise.
People living in homes with toxic black mold are exposed mainly through breathing in toxic black mold spores and mycotoxins. Toxic black mold mycotoxins create irritation and a burning feeling in a person’s air passages such as the nasal cavity, mouth and throat.
If you have any health concerns or are currently taking any medication, check with your doctor before using any internal natural remedies for black mold symptoms. If you’re looking for a doctor who has experience in diagnosing and treating mold and mycotoxin-related illnesses, you can check out the American Academy of Environmental Medicine.
We just moved into a rental house that is 50 years old. The master bathroom shower was very clean, but the grout was really stained with grey and black lines and patches. None of the cleaners I tried worked at all. I just about gave up on removing the nasty stains, but it grossed me out so much that I kept doing research on the internet.